메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

박진우 (부경대학교 )

지도교수
김찬중
발행연도
2023
저작권
부경대학교 논문은 저작권에 의해 보호받습니다.

이용수2

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The vibration isolator suitable for controlling harmonic or random excitation is a key component for the vibration fine-tuned mechanical system. So, various types of vibration-isolators, passive, active, and semi-active, have been adapted to cope with the source of excitations. This paper proposed an optimal design to minimize the vibration response of an emergency electric generator, which generates vibration during operation. The concerned mount module comprised six upper sub-mounts and one basement mass-block and should be effective for both self-excitation as well as basement input. Previous studies addressed the mount optimization of emergency electric generators; the first study proposed a design of excluded the basement mass to reduce the maintenance cost and time of the concrete basement mass and the second one focused on the fine-tuning of mechanical properties of sub-mounts. On the other hand, this study focused on the optimal design of the upper sub-mount. The optimal selection of the upper sub-mount was simulated via three degree-of-freedom model regarding the emergency electric powerplant. Two performance indices regarding the total supporting mount were used to evaluate the control capability of the supported system according to several candidates of the upper sub-mount. It can be found the advancement of the upper sub-mount can be derived for case I as compared to the original one from the simulation consequences. In addition, the effect of the mass volume of the mass-block was also evaluated from the same simulation model.

목차

1. 서론 1
1.1 연구 배경 1
1.2 연구 목적 3
1.3 논문 구성 5
2. 비상 발전기 마운트 모델의 모델링 6
2.1 비상 발전기 제원 및 마운트 모델 구조 소개 6
2.2 비상 발전기 마운트 모델 3-자유도 모델링 10
2.3 비상 발전기 마운트 모델 기계적 특성값 측정 11
2.3.1 스프링 마운트 기계적 특성값 측정 장비 소개 11
2.3.2 스프링 마운트 기계적 특성값 측정 결과 13
2.3.3 3-자유도 모델 기반 기계적 특성값 정리 18
3. 비상 발전기 마운트 모델 이론적 응답 특성 19
3.1 기초 진동 이론 19
3.1.1 감쇠 시스템의 정상 상태 응답 19
3.1.2 감쇠 시스템의 바닥 가진 23
3.2 이론적 응답 특성 도출 27
4. 비상 발전기 마운트 모델 성능 평가 지표 제안 및 성능 평가 30
4.1 성능 평가 지표 도출 30
4.2 비상 발전기 상부 기계적 특성 조정 및 응답 특성 분석 33
4.3 마운트 모델 내 기초 질량부의 영향 분석 40
5. 결론 42
참고문헌 44
감사의 글 48

최근 본 자료

전체보기

댓글(0)

0