메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

김민기 (안동대학교, 안동대학교 일반대학원)

지도교수
김영식
발행연도
2021
저작권
안동대학교 논문은 저작권에 의해 보호받습니다.

이용수2

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
External corrosion of buried piping can be controlled by using both coating and cathodic protection. However, deterioration of the coating can be caused for several reasons. The detection reliabilty by coating flaw detection methods is affected when there is interference such as metal objects connected to rectifiers and copper grid. When performing parallel DCVG inspection, a sine wave form without potential reversal in voltage gradient appears in the area where the interference exists, but this area may be not identified using the existing methods. This work focused on the interference effects of rectifiers and a copper grid on the reliability of coating flaw detection and effect of analysing direction on the reliability of coating flaw detection of pipes buried in the soil using a multi-electrode detector. In contrast, as the distance between the pipe and the copper grid increased, the reliability of the coating flaw detection increased. Measured data was analyzed on the base of parallel, vertical, and diagonal direction and then the reliability was improved by up to 46.4%, compare to the conventional method. The detection results produced by the DCVG method were discussed using current and potential simulations for a pipe with a rectifier and copper grid interference in the soil.

목차

제1장 서론 1
제2장 이론적 배경 4
2.1 전기방식과 피복 4
2.1.1 외부 전원법 4
2.1.2 음극방식과 피복 5
2.2 매설배관의 부식 및 방식감시 7
2.2.1 관대지전위 측정 7
2.2.2 배관 피복 손상부 탐측 8
2.2.3 간섭 현상의 탐지 9
제3장 연구 방법 16
3.1 매설배관 시험장 구축 16
3.1.1 배관 매설 16
3.1.2 정류기 및 접지 구리망 설치 16
3.2 피복결함 측정 방법 19
3.2.1 탐상 방향 및 결함 신호의 해석 19
3.2.2 정류기 간섭 및 접지 구리망 간섭 조건 22
3.3 전기적 간섭 시뮬레이션 방법 26
3.3.1 모델 기하구조 구성 26
3.3.2 전기화학적 파라미터 27
제4장 연구결과 및 고찰 30
4.1 피복결함 탐상 정확도에 미치는 간섭의 영향 30
4.1.1 피복결함 탐상 정확도에 미치는 인접 정류기 간섭의 영향 30
4.1.2 피복결함 탐상 정확도에 미치는 접지 구리망 간섭의 영향 36
4.2 접지 구리망 간섭 조건 하에서의 탐상 정확도 개선 48
4.2.1 [CP for Grid] 조건에서의 탐상 정확도 개선 48
4.2.2 [CP for (Pipe + Grid)] 조건에서의 탐상 정확도 개선 55
4.2.3 다전극 탐상 해석 및 2전극법 탐상 정확도 비교 62
제5장 결론 71
참고 문헌 73
Abstract 79

최근 본 자료

전체보기

댓글(0)

0