메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

박재영 (전북대학교, 전북대학교 일반대학원)

지도교수
이재준
발행연도
2018
저작권
전북대학교 논문은 저작권에 의해 보호받습니다.

이용수8

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The necessity of pavement maintenance is increasing because the proportion of asphalt pavement with a public life cycle of 10~20 years or more increases. However, it is necessary to reduce construction costs due to difficulty in securing budget. In the process of maintenance or reconstruction, a huge amount of waste asphalt pavement is generated. Until the present, it has been almost landfilled, which is not only a source of ground pollution, but can be regarded as a waste of high value materials. Also, during the manufacturing and construction of an asphalt mixture, a large amount of oil steam containing greenhouse gases is generated because of a heating process at high temperature.
In order to settle the above problems, it is essential to take measures against maintenance methods that consider economic and environmental aspects. Warm mix recycled asphalt pavement using high RAP asphalt mixes can be an appropriate countermeasure. In this study, DSR and absolute viscosity test for evaluating a recovery performance of recovered asphalt binder, FTIR-ATR for evaluating a mixing characteristics of warm mix rejuvenator and marshall stability test, IDT strength test, deformation strength test, wheel tracking test and TSR test for evalating a mixture properties were conducted to evaluate a warm mix asphalt mixtures using high RAP over 80 percent.

목차

목 차 ⅰ
표 목 차 ⅳ
그 림 목 차 v
ABSTRACT ⅶ
제 1 장 서 론 1
1.1 연구배경 및 목적 1
1.2 기대효과 4
제 2 장 문헌고찰 5
2.1 국내 건설폐기물 발생 및 처리현황 5
2.1.1 국내 건설폐기물 발생현황 5
2.1.2 아스팔트 순환골재 재활용 현황 8
2.2 중온아스팔트(Warm Mix Asphalt) 11
2.3 플랜트 가열 재활용 아스팔트 12
2.4 현장 가열 재활용 공법(Hot In-Place Recycling) 13
제 3 장 실험개요 17
3.1 사용재료 17
3.1.1 아스팔트 순환골재(RAP) 17
3.1.2 중온화 재생첨가제 20
3.1.3 신규 재료 22
3.2 푸리에 변환 적외선 분광분석(FTIR) 25
3.3 재활용 아스팔트 혼합물 배합설계 28
3.3.1 재생 아스팔트 바인더 성능 평가 29
3.3.1.1 동적 전단 유변물성 시험(DSR) 31
3.3.1.2 아스팔트 절대점도 시험 34
3.3.2 골재의 합성입도 결정 36
3.3.3 재활용 아스팔트 혼합물 공시체 제작 39
3.3.4 이론최대밀도 결정 41
3.4 아스팔트 혼합물 강도특성 평가 42
3.4.1 마샬안정도 시험 42
3.4.2 간접인장강도 시험 44
3.4.3 변형강도 시험 46
3.4.4 휠트랙킹(Wheel Tracking) 시험 47
3.4.5 인장강도비(TSR) 시험 49
제 4 장 실험결과 52
4.1 재생 아스팔트 바인더의 성능 회복 52
4.1.1 동적 전단 유변물성 시험(DSR) 결과 52
4.1.2 아스팔트 절대점도 시험 결과 54
4.2 재생 아스팔트 바인더의 혼합 특성 56
4.3 High-RAP 중온 재활용 아스팔트 혼합물 강도특성 64
4.3.1 마샬안정도 시험 결과 65
4.3.2 간접인장강도 시험 결과 67
4.3.3 변형강도 시험 결과 69
4.3.4 휠트랙킹(Wheel Tracking) 시험 결과 70
4.3.5 인장강도비(TSR) 시험 결과 73
제 5 장 결론 75
참고문헌 78

최근 본 자료

전체보기

댓글(0)

0