지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 안승국
- 발행연도
- 2017
- 저작권
- 부산대학교 논문은 저작권에 의해 보호받습니다.
이용수6
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
This study shows the mechanical and thermal properties of industrial flame retardant fabrics. The purpose of this study is to compare the performance of several fabrics used in industrial flame retardant fabrics by the mechanical and thermal test.
These mechanical and thermal properties were measured by using KES-FB System and KES-F7 Thermolabo Ⅱ. Also, water vapour permeability was measured to determine the moisture transfer.
Results of the mechanical properties showed that flame retardant finishing cotton fabrics had low values, in terms of tensile energy(WT) on tensile properties, but high shearing and bending properties. Thick flame retardant fabrics were observed to have low compressional energy. As a result of
surface properties, twill fabrics were found to have smoother texture.
Among the industrial flame retardant fabrics’ thermal properties, there are little differences in thermal conductivity, and cotton flame retardant fabrics were observed to have high Qmax value.
The moisture transfer was affected by density of the fabrics. To improve emissions of water vapour, fabrics of lower density are suited for flame retardant clothing.
These mechanical and thermal properties were measured by using KES-FB System and KES-F7 Thermolabo Ⅱ. Also, water vapour permeability was measured to determine the moisture transfer.
Results of the mechanical properties showed that flame retardant finishing cotton fabrics had low values, in terms of tensile energy(WT) on tensile properties, but high shearing and bending properties. Thick flame retardant fabrics were observed to have low compressional energy. As a result of
surface properties, twill fabrics were found to have smoother texture.
Among the industrial flame retardant fabrics’ thermal properties, there are little differences in thermal conductivity, and cotton flame retardant fabrics were observed to have high Qmax value.
The moisture transfer was affected by density of the fabrics. To improve emissions of water vapour, fabrics of lower density are suited for flame retardant clothing.
목차
1. 서론 12. 실험 52.1 시료 52.2 실험방법 62.2.1 역학 특성 62.2.2 열전달 특성 82.2.2.1 순간접촉 냉온감 82.2.2.2 열전도도 92.2.3 수분전달 특성 103. 결과 및 고찰 113.1 역학 특성 113.1.1 인장 특성 113.1.2 전단 특성 153.1.3 굽힘 특성 183.1.4 압축 특성 213.1.5 표면 특성 253.2 열적 특성 293.2.1 순간접촉 냉온감 293.2.2 열전도도 303.3 투습도 314. 결론 32참고문헌 33Abstract 35
최근 본 자료
댓글(0)
0