메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

손병훈 (고려대학교, 고려대학교 대학원)

지도교수
강용태
발행연도
2017
저작권
고려대학교 논문은 저작권에 의해 보호받습니다.

이용수1

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Refrigerants have been continuously developed for improving performances or dealing with environmental problems. Recently, regulations on refrigerants is being intensified due to global warming. To meet enhanced environmental standard, the Low GWP (global warming potential) refrigerant have been developed. R-1233zd(E) is developed in this flow is a kind of Low GWP refrigerant. It has very low GWP and near zero ODP (ozone depletion potential). In this study, to investigate characteristics of condensation heat transfer and pressure drop for R-1233zd(E), experimental study are conducted. The experiments are carried out at total and partial condensation conditions in plate heat exchangers. From the test results, it is found that chevron angle on thermal plate have a strong influence both condensation heat transfer and pressure drop. In the case of comparison with other refrigerants such as R-134a, it is shown that average heat transfer coefficients for R-1233zd(E) lower than those for R-134a and R-1234ze(E). Meanwhile, heat transfer coefficients and frictional pressure drops by the change of mean vapor quality are yielded thorough the partial condensation experiments. The test results are used to develop experimental correlations about Nusselt number and friction factor. When compared experimental results with calculated results, The experimental Nusselt number of 96.9% and experimental friction factor of 94.5% are distributed within the error range of ±20%. Finally, the accuracy of the experimental correlations derived from this study is confirmed through comparison with other experimental correlations.

목차

제 1 장 서 론
1.1 연구 배경
1.1.1 냉매의 개발과 환경 문제
1.1.2 국제 냉매 규제 동향
1.1.3 판형 열교환기
1.2 연구 동향
1.3 선행 연구
1.4 연구 목적
제 2 장 응축 열전달 성능 평가 실험 장치 및 방법
2.1 R-1233zd(E)의 특성
2.2 실험 장치 및 방법
2.2.1 실험 장치
2.2.1 시험부 판형 열교환기
2.2.3 실험 방법
2.3 데이터 처리
2.3.1 완전 응축 실험
2.3.2 부분 응축 실험
2.4 불확도 분석
제 3 장 실험 결과 및 토의
3.1 질량 유속에 따른 응축 열전달 성능 평가
3.1.1 쉐브론 각도 변화에 의한 영향
3.1.2 기존 연구와의 비교
3.2 평균 건도에 따른 응축 열전달 성능 평가
3.2.1 열 유속 변화에 의한 영향
3.2.2 질량 유속 변화에 의한 영향
3.2.3 응축 압력 변화에 의한 영향
3.3 응축 열전달 및 마찰 압력강하 상관식 개발
3.3.1 응축 열전달 상관식
3.2.3 마찰계수 상관식
3.2.3 다른 상관식과의 비교
제 4 장 결 론
Reference

최근 본 자료

전체보기

댓글(0)

0