지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 김준태
- 발행연도
- 2016
- 저작권
- 공주대학교 논문은 저작권에 의해 보호받습니다.
이용수3
이 논문의 연구 히스토리 (9)
2018
2016
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Ventilation to improve indoor air quality is significant element for human health. Ventilation somewhat contributes to heat loss, HRV system can be a solution to reduce heat loss by exchanging discarded heat of exhaust air with incoming cold air. However, freezing and dew condensation problems can be caused when exhaust air heat is exchanged with colder outdoor air. PVT system is the technology not only producing power but also using pre-heated energy from the back of PV module as heat source concurrently. Heated air from an air-type PVT can be coupled with HRV system for preheating instead of outside air intake. Thus the ventilation efficiency can be improved. In addition, problems in traditional HRV system caused by low temperature air during winter, can be resolved.
In this study, the experimental performance of air type BIPVT system with HRV has been studied experimentally. Thus, BIPVT modules generating 1kWp electrical capacity were installed with HRV in a experimental house. The experiment was accomplished with heating space. In results, the thermal and electrical performance of BIPVT collector was 32% and 14% respectively. Therefore, overall efficiency of the BIPVT collector with HRV was 46%. Heat transfer efficiency of HRV was improved to about 20% with pre-heat air from BIPVT collector and heating load was reduced 10% than conventional HRV system.
In this study, the experimental performance of air type BIPVT system with HRV has been studied experimentally. Thus, BIPVT modules generating 1kWp electrical capacity were installed with HRV in a experimental house. The experiment was accomplished with heating space. In results, the thermal and electrical performance of BIPVT collector was 32% and 14% respectively. Therefore, overall efficiency of the BIPVT collector with HRV was 46%. Heat transfer efficiency of HRV was improved to about 20% with pre-heat air from BIPVT collector and heating load was reduced 10% than conventional HRV system.
목차
Ⅰ. 서론 11. 연구배경 및 목적 12. 연구방법 3Ⅱ. 공기식 PVT 시스템 41. 공기식 PVT 시스템 개요 41) 공기식 PVT 시스템의 정의 42) 공기식 PVT 시스템의 원리 및 구성 43) 공기식 PVT 시스템 연구동향 10Ⅲ. 공기식 PVT 컬렉터 성능실험 201. 공기식 PVT 컬렉터 201) 공기식 PVT 컬렉터 설계 202) 실험 장비 및 방법 223) 공기식 PVT 컬렉터의 성능분석 29Ⅳ. HRV와 연계된 공기식 BIPVT 시스템 321. 폐열회수 환기시스템(Heat Recovery Ventilator) 322. HRV와 연계된 공기식 BIPVT 시스템의 성능분석 341) HRV와 연계된 공기식 BIPVT 시스템 설계 및 제작 342) HRV와 연계된 공기식 BIPVT 시스템의 난방기간 성능분석 403) HRV와 연계된 공기식 BIPVT 시스템의 비 난방기간 성능분석 44Ⅴ. 결론 46참 고 문 헌 48ABSTRACT 52
최근 본 자료
댓글(0)
0