메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

이아람 (부경대학교, 부경대학교 과학기술융합전문대학원)

지도교수
김종수
발행연도
2014
저작권
부경대학교 논문은 저작권에 의해 보호받습니다.

이용수1

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In this paper, thermal design of single searchlight module conducted in order to replace 2000 watt halogen searchlight to 50 watt LED. The thermal design conditions of high-power 5 watt LEDs-based searchlight were designed 12 models (#1~#12) with the different length (L), width (W), and thickness (t) of LED-supporting bar were suggested and optimized with varying LED bar’shape, materials, ambient temperature and bar angle. The LED junction temperature was estimated by using Computational Fluid Dynamics simulation. The thermal design conditions were found as follows; LED bar’ shape: L=40 mm, W=4 mm, t=10 mm, copper material, LED junction temperature of 116.6 ℃, ambient temperature of 50 ℃, total mass of 184 g, and shadowing area of 320 mm2. The difference between the junction temperatures of our fabricated and simulated LEDs-based searchlight modules is about 3 ℃, which confirms the validity of our thermal simulation results. The optical characteristics of searchlight were measured as follows; Input power was 50 watt, peak beam candle power was 2.0*106 [cd], beam angle was 1.4˚. Both searchlight were similar in optical properties but LED searchlight of power consumption was lower than halogen searchlight around 97.5 %.

목차

제 1 장 서 론 6
1.1 연구 배경 및 목적 6
1.2 선행 연구 9
제 2 장 관련 이론 12
2.1 탐조등 12
2.2 열전달 16
2.3 방열설계 22
제 3 장 실험방법 및 시뮬레이션 25
3.1 LED 탐조등의 설계목표 25
3.2 열 해석 시뮬레이션 방법 31
3.2.1 시뮬레이션 조건 31
3.2.2 탐조등 모듈 형상 설계 33
3.2.3 최적화를 위한 해석변수 선정 35
3.3 LED 탐조등 성능 평가 시스템 36
제 4 장 결과 및 고찰 40
4.1 LED 패키지 특성 분석 40
4.1.1LED 패키지 광 특성 분석 40
4.1.2 LED 패키지 열 특성 분석 41
4.1.3 LED 패키지 구조분석 및 전산 모사 45
4.2 탐조등 모듈의 열 해석 시뮬레이션 결과 47
4.2.1. 재질에 따른 방열특성 47
4.2.2. 주변온도에 따른 방열특성 53
4.2.3. 방향에 따른 방열특성 56
4.2.4. 모델별 질량과 빛 가림 면적 59
4.2.5. 최적모델 선정 61
4.3 LED 탐조등 모듈 제작 및 평가 62
4.4 LED 탐조등 시스템 제작 및 평가 66
제 5 장 결 론 73
참고문헌 75
Abstract 78

최근 본 자료

전체보기

댓글(0)

0