지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 吉暻碩
- 발행연도
- 2014
- 저작권
- 한국해양대학교 논문은 저작권에 의해 보호받습니다.
이용수0
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
This thesis dealt with the design of a high power LED searchlight to replace a conventional searchlight with 1kW halogen lamps. The design specification follows KDS 6230-1046-1 and KS V 8469. An LED package and a lens with the beam angle of 6˚ were used to meet the center luminous intensity of 800,000cd specified in KS V standard.
Heat sink was selected by a simulation because the optical power and the life span of LED changes depending on the heat amount. The heat dissipation of a prototype LED searchlight improved the durability as it is made with air cooling type using natural convection instead of using the fan or heat-pipe.
As a result of the test, the power consumption of a prototype LED searchlight (150W) was saved by 85% compared to the halogen lamp searchlight (1kW). The center luminous intensity was 945,000cd, satisfying KS V 8469 and the luminous efficacy was improved by 4.7 times compared to that of conventional searchlights.
Also, the beam angle, the color temperature, and the color rendering were measured 5.4°, 5,500K, and 70, respectively. The surface temperature of a prototype LED searchlight (below 60℃) and the surrounding temperature of the SMPS (below 50℃) satisfied KS C IEC 60092-306.
Heat sink was selected by a simulation because the optical power and the life span of LED changes depending on the heat amount. The heat dissipation of a prototype LED searchlight improved the durability as it is made with air cooling type using natural convection instead of using the fan or heat-pipe.
As a result of the test, the power consumption of a prototype LED searchlight (150W) was saved by 85% compared to the halogen lamp searchlight (1kW). The center luminous intensity was 945,000cd, satisfying KS V 8469 and the luminous efficacy was improved by 4.7 times compared to that of conventional searchlights.
Also, the beam angle, the color temperature, and the color rendering were measured 5.4°, 5,500K, and 70, respectively. The surface temperature of a prototype LED searchlight (below 60℃) and the surrounding temperature of the SMPS (below 50℃) satisfied KS C IEC 60092-306.
목차
목 차 ⅰ그림 및 표 목차 ⅲAbstract ⅴ제 1 장 서 론 1제 2 장 이 론 42.1 탐조등 42.2 성능 및 요구사항 7제 3 장 설계 및 제작 113.1 광원부 113.1.1 광학계 123.1.2 방열부 203.2 전원부 및 기구부 26제 4 장 평가 및 분석 284.1 전기적 특성 284.2 광학적 특성 294.3 환경적 특성 34제 5 장 결 론 36참 고 문 헌 38
최근 본 자료
댓글(0)
0