메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

유지훈 (부산대학교, 부산대학교 대학원)

지도교수
김귀순
발행연도
2014
저작권
부산대학교 논문은 저작권에 의해 보호받습니다.

이용수0

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In this paper, a numerical study was performed to investigate the performance characteristics of a pre-heater. The effects of fin pitch(s=18.99mm, 12.44mm, 9.00mm), fin array type(in-line, staggered, leaned array) and swirler vane angle(25°, 45°, 65°) were reported. FLUENT 13.0 was employed to perform a three-dimensional flow analysis. The present study indicated that Colburn -factor decreases with the decrease of fin pitch attached in the annular tube. But the fin pitch has little effect on -factor. The staggered array and leaned array showed improved heat transfer performance compared with in-line array, so that Colburn -factor was increased. It also showed that the -factor of leaned array is the highest in the studied range of Reynolds number. Moreover, swirl number increased as the swirler vane angle increased. Compared with the baseline, heat transfer rate has little effect but the present study shows an increase of swirl number by max. 82% and an reduction of swirler weight by max. 71%.

목차

1. 서론
1.1 연구배경 및 필요성
1.2 휜에 대한 연구
1.3 스월에 대한 연구
2. 수치해석 기법 및 해석 모델
2.1 지배 방정식
2.2 휜의 수치해석
2.2.1 해석 모델
2.2.2 해석 조건
2.3 스월러의 수치해석
2.3.1 해석 모델
2.3.2 해석 조건
3. 해석 결과
3.1 수치해석 검증
3.2 휜에 대한 해석 결과
3.2.1 휜 피치에 의한 영향
3.2.2 휜 배열에 의한 영향
3.2.3 열전달 성능 비교
3.3 스월러에 대한 해석 결과
3.3.1 스월러 모델(DHP-180) 해석 결과
3.3.2 스월러 유입 각에 의한 영향
3.3.3 열전달 및 스월 수 비교
4. 결 론
참 고 문 헌
초록(Abstract)

최근 본 자료

전체보기

댓글(0)

0