지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 권성열
- 발행연도
- 2013
- 저작권
- 부경대학교 논문은 저작권에 의해 보호받습니다.
이용수51
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Abstract
In this study, efficiency and electrical characteristics of DSSC was measured by the fabrication of TiO2 photo electrode and Pt counter electrode.
TiO2 photo electrode layered by using commercial TiO2 paste with tape casting and doctor blade method, then oxide semiconductor layer formed by different annealing temperature. Efficiency and electrical characteristics of DSSC was measured.
Furthermore, fabricated DSSCs efficiency and electrical characteristics by different thickness of TiO2 photo electrode was measurements, compared.
Pt counter electrode layered by using commercial Pt paste with tape casting and doctor blade method, then Pt paste coating thickness by different tape casting layer. Efficiency and electrical characteristics of DSSC was measured.
The thickness of surlyn film between TiO2 electrode and Pt counter electrode was varied. Then it’s efficiency and electrical characteristics of fabricated DSSCs were measured.
Fabricated by step wise annealing temperature method shows a higher fill factor and efficiency than linear annealing temperature method. And Shows a highest efficiency in 15 ㎛ thickness of photo electrode. Short circuit current decreased as increases photo electrode thickness.
Fabricated counter electrode, short circuit current and efficiency decreased as Pt paste coating thickness increases. On the contrary open circuit voltage increased as Pt paste coating thickness increases.
DSSC that 15 ㎛ thickness TiO2 photo electrode layered by stepwise annealing temperature methode and 1 layer Pt coated counter electrode with 60 ㎛ thickness surlyn film shows a highest 5.114% efficiency.
In this study, efficiency and electrical characteristics of DSSC was measured by the fabrication of TiO2 photo electrode and Pt counter electrode.
TiO2 photo electrode layered by using commercial TiO2 paste with tape casting and doctor blade method, then oxide semiconductor layer formed by different annealing temperature. Efficiency and electrical characteristics of DSSC was measured.
Furthermore, fabricated DSSCs efficiency and electrical characteristics by different thickness of TiO2 photo electrode was measurements, compared.
Pt counter electrode layered by using commercial Pt paste with tape casting and doctor blade method, then Pt paste coating thickness by different tape casting layer. Efficiency and electrical characteristics of DSSC was measured.
The thickness of surlyn film between TiO2 electrode and Pt counter electrode was varied. Then it’s efficiency and electrical characteristics of fabricated DSSCs were measured.
Fabricated by step wise annealing temperature method shows a higher fill factor and efficiency than linear annealing temperature method. And Shows a highest efficiency in 15 ㎛ thickness of photo electrode. Short circuit current decreased as increases photo electrode thickness.
Fabricated counter electrode, short circuit current and efficiency decreased as Pt paste coating thickness increases. On the contrary open circuit voltage increased as Pt paste coating thickness increases.
DSSC that 15 ㎛ thickness TiO2 photo electrode layered by stepwise annealing temperature methode and 1 layer Pt coated counter electrode with 60 ㎛ thickness surlyn film shows a highest 5.114% efficiency.
목차
목 차목 차 ⅰ그림 목차 ⅲ표 목차 ⅴAbstract ⅵⅠ. 서 론 1Ⅱ. 이론적 배경 31. 태양전지 이론 31.1 광전효과 31.2 태양전지 52. DSSC 92.1 DSSC 개요 92.2 DSSC의 구조 112.3 DSSC의 원리 142.4 DSSC의 특성평가 19Ⅲ. DSSC 제작 241. DSSC 제작공정 242. DSSC 제작 262.1 광전극 제작 262.2 상대전극 제작 282.3 전극 접합 293. 측정 30Ⅳ. 결과 및 고찰 321. 광전극 소성온도 상승방식에 따른 DSSC 효율특성 322. 광전극 두께에 따른 DSSC 효율특성 363. 상대전극 성막 두께에 따른 DSSC 효율특성 414. 광전극과 상대전극 간격에 따른 DSSC 효율특성 47Ⅴ. 결 론 53참고문헌 55
최근 본 자료
댓글(0)
0