최근 우리나라에서는 지구환경의 보전과 인간의 새로운 삶의 질을 개선하고자하는 정책으로서 모든 산업분야에 저탄소 녹색 성장을 위한 프로젝트를 추진하고 있다. 건설 분야에서도 건축 및 토목 사업에 있어서 그린 환경을 추구하기 위한 새로운 제도 및 공법 도입의 일환으로 콘크리트로 만든 인공지반 위에 조경 식재를 하여 도시 및 단지 공간의 환경을 개선하는 프로젝트를 활발히 도입하고 있다. 이러한 인공지반의 녹화 시스템의 정착과 활성화를 위하여 정부에서 인공지반 상부에 녹화 조성 시 지원해주는 제도가 진행되고 있다. 이러한 시대적 요구에 따라 그동안 도심을 가득 채우고 있으면서도 아무런 가치 없이 활용하지 않던 많은 콘크리트 인공지반 상부를 대상으로 옥상녹화 시스템의 시공이 증가하고 있으며, 건설업계와 학계에서도 옥상녹화 시스템의 적극적인 도입을 위하여 구조물의 안전성과 내구성 확보를 위한 재료 및 공법에 관한 연구와 개발이 활발히 진행되고 있다. 옥상녹화 시스템에 사용되는 방수ㆍ방근 재료의 종류에는 도막계, 합성고분자시트계, 금속계, 패널류 등이 있다. 이중에서 도막재는 다른 재료에 비하여 접합부의 용접이나 접합 없이 하나의 일체화된 멤브레인 막을 형성 시킬 수 있다는 장점을 지닌 방수ㆍ방근 소재이다. 그중에서 유리섬유강화플라스틱(琉璃纖維强化─, glass fiber reinforced plastic)은 내근성, 내약품성, 내박테리아성 있어 방수와 방근재로써 적합한 소재이다. 유리섬유강화플라스틱은 1940년대 초부터 사용되기 시작하여 플라스틱과 결합함으로써 다채로운 물품을 생산해 내고 있다. 이에 본 연구에서는 접합부를 일체화 시공을 하는 도막재료 중에서 현재 내근성이 있다고 연구 보고 되고 있는 FRP와 자착식 부틸고무시트위에 PET 필름을 적층하고 그 상부에 부직포를 두어 FRP와 일체화시킨 방수와 방근을 겸한 공법을 개발하고 개발공법의 성능을 평가해보고 이를 이용한 옥상방수방근 공법의 활용방안을 제시하고자 한다.
Recently, our country is implementing projects for low-carbon green growth in all industry areas as the policy to improve the preservation of earth environments and the quality of human''s new life. In construction areas as well, the projects for improvement of environment in the city and the complex spaces are actively introduced by landscaping and planting on the artificial ground made of concrete as a part of introduction of new systems and new construction methods to pursue green environments in construction and civil projects. For settlement and activation of such afforestation of the artificial grounds, the system of support by the government is being implemented upon afforestation on the top of the artificial grounds. In compliance with such needs of the times, construction of the rooftop afforestation system is being increased for the top of many concrete artificial grounds that were not utilized for any value while filling the downtown for all that time, research and development on materials and construction methods is actively pursued in the construction industry and the academy for securing safety and durability of structures to actively introduce the rooftop afforestation system. Among the kinds of waterproof and roof penetration resistant materials used in the rooftop afforestation system, there are paint film system, synthetic polymer sheet system, metal system, panel system, etc. Among these, the paint film material is a waterproof, roof penetration resistant material with advantages of forming an integrated membrane without welding or joining of joints as compared with other materials. Of those, the glass fiber reinforced plastic is a material suitable as the waterproof, roof penetration resistant material due to its roof penetration resistance, chemical resistance, and bacteria resistance. The glass fiber reinforced plastic has been used since early 1940''s and is producing diverse articles by combining with plastics. Hence, the objectives of the present study are to develop a construction method with doubling of the waterproofing and the roof penetration resistance where PET film is laminated on the self-adhesion butyl rubber sheet and FRP currently reported as having the roof penetration resistance among paint film materials for integration construction of the joints, and the felt is placed on its top so as to be integrated with FRP, to evaluate the performance of the developed construction method, and to present the utilization measures for the rooftop waterproof, roof penetration resistant construction method using this method.