메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

김유종 (동국대학교, 동국대학교 대학원)

지도교수
김승덕
발행연도
2013
저작권
동국대학교 논문은 저작권에 의해 보호받습니다.

이용수3

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Objectives
This study aimed to investigate temperature characteristics by heat transfer type and water content of therapeutic modalities.

Methods
We selected heating and cooling modalities that are frequently used in clinical by heat transfer type: conduction, convection, radiation, and conversion. In addition, we set water content of hot and ice pack by 3 levels: dry, moist and wet. We used ham as tissue model, and applied the modalities for 30 minutes. We measured real-time changed temperature(℃) of the surface, 2, 4, 6, 8, 10, 12, and 14㎜ depth.

Results
1. In conduction-using hot pack, ice pack, and CryoStamp heating-cooling combination therapy unit(40℃/-15℃), the surface temperature sharply rose close to equilibrium in first 5 minutes.
2. In convection-using smokeless moxa, temperature slowly rose to the maximum at 25-minute elapsed time. But in another convection-using CRAiS cryotherapy device, result was similar to that of conduction.
3. In radiation-using infrared lamp, result was similar to that of conduction, but not reached equilibrium during applying time.
4. In conversion-using ultrasound device, temperature was the highest at 6㎜ depth, and not reached equilibrium during applying time.
5. When compared by water content in hot and ice pack, the highest changed surface temperature were in moist hot pack and wet ice pack. But there was almost no significant difference(p>0.05) among three water content levels.

Conclusions
We could comprehend temperature characteristics and proper use of modalities by heat transfer type and water content. It would be necessary to consider in vivo physical conditions in further studies.

목차

I. 서 론 = 1
II. 재료 및 방법 = 2
1. 냉·온 치료기 = 2
1) 전도 방식의 치료기 = 3
2) 대류 방식의 치료기 = 6
3) 복사 방식의 치료기 = 8
4) 전환 방식의 치료기 = 9
2. 조직모델 = 10
1) 재료 = 10
2) 제작 = 10
3) 고정 기구 = 10
3. 측정 및 데이터 처리 = 12
1) 측정 기구 = 12
2) 데이터 획득 장치 = 13
3) 데이터 처리 프로그램 = 14
4) 측정 방법 = 15
5) 통계 처리 = 15
III. 결 과 = 16
1. 열전달 방식에 따른 온도 변화량 = 16
1) 전도 방식의 치료기 = 16
2) 대류 방식의 치료기 = 19
3) 복사 방식의 치료기 = 21
4) 전환 방식의 치료기 = 23
2. 수분 함량에 따른 온도 변화량 = 25
1) Hot pack = 25
2) Ice pack = 27
3. 깊이별 온도 변화 양상 비교 = 29
1) 온열 치료기 = 29
2) 냉각 치료기 = 31
IV. 고 찰 = 33
V. 결 론 = 41
참고 문헌 = 42
ABSTRACT = 46

최근 본 자료

전체보기

댓글(0)

0