지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 발행연도
- 2013
- 저작권
- 창원대학교 논문은 저작권에 의해 보호받습니다.
이용수0
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
ABSTRACT
Minjae Shin
(Supervised by Professor Chaesil Kim)
Department of Mechanical Engineering,
Graduate School of Changwon National University
The vibration control simulation of magnetic bearing-shaft was investigated in this study. This paper also proposes the simulation method and algorithm the vibration control of the magnetic bearing-shaft using multi-body dynamic software.
The paper focuses on the control system of the magnetic bearing-shaft applied any rotational speed using the Predictive Expert Control Method(PECM). And this paper composes the flexible rotational model about the shaft using two magnetic bearings in the way of former papers, performs the control simulation and derives the control value. And this study suggests the control possibility according to any rotational speed using the new PECM algorithm method.
The advantages of PECM are 1) to decrease the working time than the conventional method. 2) the possibility of control to obtain the control value automatically according to any rotational speed. 3) to control accurately the model of the magnetic bearing-shaft increasing in number of the control value according to any rotational speed.
The PECM is the control algorithm of rotational system according to any rotational speed and it was developed from the control algorithm using Predict Control Method(PCM). This algorithm controls any rotational speed system changed P-Gain and phase. Through the result of simulation applied PECM, the PECM can be possible to control of actual tests.
Minjae Shin
(Supervised by Professor Chaesil Kim)
Department of Mechanical Engineering,
Graduate School of Changwon National University
The vibration control simulation of magnetic bearing-shaft was investigated in this study. This paper also proposes the simulation method and algorithm the vibration control of the magnetic bearing-shaft using multi-body dynamic software.
The paper focuses on the control system of the magnetic bearing-shaft applied any rotational speed using the Predictive Expert Control Method(PECM). And this paper composes the flexible rotational model about the shaft using two magnetic bearings in the way of former papers, performs the control simulation and derives the control value. And this study suggests the control possibility according to any rotational speed using the new PECM algorithm method.
The advantages of PECM are 1) to decrease the working time than the conventional method. 2) the possibility of control to obtain the control value automatically according to any rotational speed. 3) to control accurately the model of the magnetic bearing-shaft increasing in number of the control value according to any rotational speed.
The PECM is the control algorithm of rotational system according to any rotational speed and it was developed from the control algorithm using Predict Control Method(PCM). This algorithm controls any rotational speed system changed P-Gain and phase. Through the result of simulation applied PECM, the PECM can be possible to control of actual tests.
목차
등록된 정보가 없습니다.
최근 본 자료
댓글(0)
0