메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김정훈 (국립창원대학교) 문준오 (국립창원대학교) 조성우 (두산에너빌리티) 구남기 (두산에너빌리티) 윤강준 (두산에너빌리티)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第43卷 第2號
발행연도
2025.4
수록면
185 - 193 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the microstructure and mechanical properties of GMAW cladded stainless steel layer on SA508 Gr.3 base steel were investigated. In SA508 base steel, black strip regions were observed with a higher concentration of alloying elements and a greater precipitation of carbides compared to the normal region, forming microstructure with a higher fraction of martensite. The fusion line (FL) between cladding layer and SA508 base steel was formed as a martensite layer, and unmixed region was observed near the FL. The 309L and 308L cladding layers exhibited complex solidification microstructures with cellular and vermicular morphologies. The microstructure was observed using optical microscopy (OM), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD) analyses. Finally, the hardness distribution across the FL was evaluated and the correlation between micro- structure and hardness was then analyzed.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0