메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박광우 (Kyungnam University) 정태욱 (Kyungnam University)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제74권 제3호
발행연도
2025.3
수록면
440 - 446 (7page)
DOI
10.5370/KIEE.2025.74.3.440

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
SPMSM is used as an actuator that drives each system of automobiles according to the trend of automobile electrical equipment. When designing an automobile, it is required to reduce the vibration and noise of the SPMSM according to the miniaturization of an actuator and the need for motor control and quietness to reduce fuel efficiency. Cogging torque has a great influence on the noise and vibration generation of the motor, so it should be reduced as much as possible during design. Several studies have been conducted to reduce the cogging torque of SPMSM, but a comparative analysis of a method of minimizing cogging torque by designing a stator shape having an auxiliary pole is not widely known. Therefore, in this paper, a method that can effectively reduce the cogging torque of SPMSM using auxiliary poles was designed through finite element analysis, electrical characteristics were analyzed through finite element analysis for basic models without auxiliary poles and models with auxiliary poles. For the optimal design of motors with auxiliary poles, the main design factors of stators and rotors were derived to obtain the optimal design shape that meets the design goals using the reaction surface method.

목차

Abstract
1. 서론
2. 코깅 토크 저감 설계
3. 최적 설계
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092321017