메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이창준 (호서대학교) 김진배 (호서대학교) 유철휘 (호서대학교) 황갑진 (호서대학교)
저널정보
한국수소및신에너지학회 한국수소및신에너지학회논문집 한국수소 및 신에너지학회 논문집 제36권 제1호
발행연도
2025.2
수록면
9 - 17 (9page)
DOI
10.7316/JHNE.2025.36.1.9

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fe/Cr catalyst pellet was prepared for the high temperature water gas shift reaction (HTWGSR) to produce H₂ gas from the gasified gases of waste plastics. The Fe/Cr catalyst pellet was synthesized using a compression molding method with the prepared catalyst powders. The HTWGSR was conducted using the prepared catalyst pellet with CO:H₂O ratios of 1:2 to 1:4 at a temperature range of 300-400℃. The maximum average CO conversion was observed at a CO:H₂O ratio of 1:3, with a value of 96.5% at 300℃, at CO:H₂O ratios of 1:3 and 1:4, with a value of 96.7% at 350℃, and at a CO:H₂ O ratio of 1:4, with a value of 95% at 400℃. It is considered that a CO:H₂O ratio of 1:3 at 300℃ and 350℃, and a CO:H₂O ratio of 1:4 at 400℃, are suitable for high temperature water gas shift reactions in terms of CO conversion.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092472028