지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.8
- 수록면
- 3,043 - 3,066 (24page)
- DOI
- 10.1016/j.net.2024.03.004
이용수
초록· 키워드
오류제보하기
In various small modular reactor (SMR) designs currently under development, the conventional concrete containment building has been replaced by a metal containment vessel (MCV). In these systems, the gap between the MCV and the reactor pressure vessel is filled with gas or vacuumed weakly, effectively suppressing conduction and convection heat transfer. However, thermal radiation remains the major mode of heat transfer during normal operation. The objective of this study was to investigate the heat-transfer mechanisms in integral pressurized water reactor (IPWR)-type SMRs under various gas-filled conditions using computational fluid dynamics.
The use of thermal radiation shielding (TRS) with a much lower emissivity material than the MCV surface was also evaluated. The results showed that thermal radiation was always the dominant contributor to heat loss (48–97%), while the conjugated effects of the gas candidates on natural convection and thermal radiation varied depending on their thermal and radiative properties, including absorption coefficient. The TRS showed an excellent insulation performance, with a reduction in the total heat loss of 56–70% under the relatively low temperatures of the IPWR system, except for carbon dioxide (13%). Consequently, TRS can be utilized to enhance the thermal efficiency of SMR designs by suppressing the heat loss through the MCV.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Thermal-hydraulic analysis of a new conceptual heat pipe cooled small nuclear reactor system
Nuclear Engineering and Technology
2020 .01
-
EVALUATION OF HEAT-FLUX DISTRIBUTION AT THE INNER AND OUTER REACTOR VESSEL WALLS UNDER THE IN-VESSEL RETENTION THROUGH EXTERNAL REACTOR VESSEL COOLING CONDITION
Nuclear Engineering and Technology
2015 .01
-
Evaluating direct vessel injection accident-event progression of AP1000 and key figures of merit to support the design and development of water-cooled small modular reactors
Nuclear Engineering and Technology
2024 .06
-
Strategic analysis on sizing of flooding valve for successful accident management of small modular reactor
Nuclear Engineering and Technology
2024 .03
-
Experimental assessment of thermal radiation effects on containment atmospheres with varying steam content
Nuclear Engineering and Technology
2022 .11
-
Design and construction of fluid-to-fluid scaled-down small modular reactor platform: As a testbed for the nuclear-based hydrogen production
Nuclear Engineering and Technology
2024 .03
-
P X – An Innovative Safety Concept for an Unmanned Reactor
Nuclear Engineering and Technology
2016 .01
-
Modular reactors: What can we learn from modular industrial plants and off site construction research
Nuclear Engineering and Technology
2024 .01
-
Integral effect test for steam line break with coupling reactor coolant system and containment using ATLAS-CUBE facility
Nuclear Engineering and Technology
2021 .08
-
i-SMR 종합효과시험장치 철제형격납건물 척도해석 및 기본설계
한국유체기계학회 학술대회 논문집
2023 .12
-
캐나다 북부지역의 지반 및 환경 조건이 소형 모듈 원자로(SMR, Small Modular Reactor)의 설계와 운영에 미치는 영향
대한토목학회지
2025 .04
-
Technology Selection for Offshore Underwater Small Modular Reactors
Nuclear Engineering and Technology
2016 .01
-
복사에너지를 이용한 TIM소재의 방열 특성 향상을 위한 연구
한국표면공학회지
2019 .04
-
개방수조형 저출력 연구로의 환경적 열 손실 평가에 대한 분석적 접근
동력시스템공학회지
2019 .10
-
혁신 초소형 원자로를 위한 3D 프린팅 기술 활용 액체 금속 히트파이프의 열 성능 조사
한국유체기계학회 학술대회 논문집
2022 .06
-
Simplified Nonlinear FE Model for Reactor Containment Building
대한토목학회 학술대회
2020 .10
-
혁신형 SMR 개발 목표와 브랜딩에 관한 검토
한국에너지학회 학술발표회
2024 .10
-
PGSFR 소듐냉각고속로 원자로용기 설계 및 구조건전성 평가
한국압력기기공학회 논문집
2016 .06
-
혁신형 SMR 기술개발 및 사전인허가 준비 현황
한국에너지학회 학술발표회
2023 .10
-
유한요소해석을 이용한 혁신형 SMR 격납용기 하부 천이구간 평가
한국에너지학회 학술발표회
2024 .10
최근 본 자료
댓글(0)
0