메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김종겸 (National Gangneung-wonju University)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제73권 제12호
발행연도
2024.12
수록면
2,224 - 2,230 (7page)
DOI
10.5370/KIEE.2024.73.12.2224

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Induction motors can cause problems with the electrical quality of other devices voltage drop due to the high starting current when starting, so the reactor starting method is often used when the capacity is large. Since this induction motor consists of resistance and reactance components, the power factor is relatively low. When an induction motor starts, the reactive power is greater than the active power, so the power factor is low. As the speed increases, the sizes of the active and reactive power are reversed, and the power factor improves. In reality, the power factor when driving at rated speed is lower than that required by the power company, so the power factor is compensated with the help of a reactive power compensation device such as a capacitor. In the reactor starting method, capacitors are sometimes installed at the front and rear ends of the reactor. Reactor startup requires a long startup time and a long operating section with a low power factor, and the power characteristics appear different during startup depending on their installation location.
In this study, we analyzed how changes in current and power affect the power factor during startup at the installation location of the capacitor in the reactor startup method.

목차

Abstract
1. 서론
2. 유도전동기 기동과 역률 보상 장치
3. 동작 특성 분석
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092308578