초소형위성 중심의 현대 위성개발 방식은 제한된 공간 내 기능/성능 요구조건이 상향되고 있으며, 위성체 내부 전장품의 소형/경량/고성능화 또한 요구되고 있다. 실제 위성 패널에 볼트 체결방식으로 탑재되는 전장품은 해석 시 일반적으로 전장품 마운팅 인터페이스에 경계 및 하중조건을 구현한다. 그러나 상기 해석방식은 패널과 접촉되는 실제 장착조건 반영의 불명확성이 존재하여 시험까지의 과정을 통해 설계 유효성을 확보하게 된다. 해석 단계에서의 불명확성은 구조건전성 평가의 신뢰성 감소로 이어져 추가 안전여유를 확보하는 등의 과도설계로 이어질 수 있어 이에 대한 검증이 요구된다. 본 논문에서는 전장품 설계 시 일반적으로 적용되는 해석방식 기반의 구조해석 수행 및 제작하여 전장품 장착조건별 진동시험을 수행하였다. 이후 획득한 각 조건 별 가속도응답과 해석 결과 간 상호 분석을 통해 장착조건에 따른 가속도응답 차이를 해석적으로 확인하였다.
Modern satellite development methods for microsatellites are raising functional/performance requirements within confined spaces. Miniaturization, lightweight, and high-performance of electronic components inside satellites are also required. When analyzing electronics mounted on an actual satellite panel using a bolt fastening method, boundary and load conditions are typically applied to the electrical component mounting interface. However, the above method can introduce uncertainty regarding the analysis reflecting actual mounting conditions in contact with the panel. Nevertheless, reliability is ensured through the testing process. Uncertainty during the analysis stage reduced the reliability of evaluating structural integrity, leading to over-design with excessively large margins to secure additional safety margins. However, this result requires verification. In this study, a structural analysis based on an analysis method commonly applied in the design of electronics was performed. Vibration tests were conducted for each mounting condition of electronics. Acceleration response of each condition was analyzed and the difference in acceleration response according to the mounting condition was analytically verified.