메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김무준 (방재시험연구원) 권혁준 (방재시험연구원) 이길용 (방재시험연구원) 여한승 (방재시험연구원)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2023년도 하계학술발표대회 논문집
발행연도
2023.6
수록면
125 - 128 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the heat release rate of the material unit is measured and the combustion characteristics are analyzed and used as a reference material for the real fire test of the pipe insulation material. KS F ISO 5660-1 was followed to determine the combustion characteristics, and the heating condition was carried out at 50 ㎾/㎡ for 10 minutes. The test body used a highy flame retardant film and a film-PE made of PE to compare combustion characteristics according to the presence or absence of silver foil by dividing the surface (PE-S) of the silver foil-flammable PE foam (PE-H). Looking at PE-S and PE-H among PE, THR and firing time show a large difference depending on the heating surface, especially peak HRR. This seems to have affected the combustion of PE foam. MM showed high peak HRR and somewhat low THR compared to the lower density compared to PU. RI showed a tendency to have high peak HRR and THR compared to density. On the other hand, PU showed relatively low peak HRR and THR despite high density. D-PE showed a density about three times higher than PE, showed significantly lower levels of peak HRR and THR, and no ignition occurred in the test specimen. It is considered that the highly retardant film reduced the radiant heat applied to the PE foam.

목차

Abstract
1. 서론
2. 배관 보온재에 대한 연소특성
3. 시험결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0