메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김민하 (Cheorwon Plasma Research Institute) 배성환 (Cheorwon Plasma Research Institute) 김용득 (Cheorwon Plasma Research Institute)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제38권 제6호
발행연도
2024.12
수록면
403 - 411 (9page)
DOI
10.5207/JIEIE.2024.38.6.403

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, we tried the design of an economical system to control various LED lightings using Arduino MKR WiFi 1010 and RS-485 based Modbus protocol. The key features of the lighting system based on a timer were overall lighting ON/OFF, user-adjustable dimming, and sensor-integrated automatic dimming. The master device read data once from sensors, which were installed on each floor of the module composed of multi-layered beds, and uploaded this data to a server via MQTT. It compared the data to the pre-configured target sensor values by user and the master processed the data into dimming control values and wrote the values to the corresponding holding register in slave devices. The lighting system used in the test consisted of LED lightings(1200mm bar-type Quantum-dot lighting) with SMPS supporting 1-10V dimming, a master board, sensor boards, and LED control boards. All components were self-developed. The system was installed for pilot testing in a 2-layer system in a closed green house. Occasional issues were observed, which can be resolved, such as relay control failures and sporadic communication errors. This system configuration was expected to provide precise automatic light control, thereby improving crop productivity and quality.

목차

Abstract
1. 서론
2. 하드웨어 구성
3. 모드버스 레지스터맵 및 기능
4. 시스템 구성
5. 메인보드 구성 및 S/W 제어
6. 광센서보드 구성 및 S/W 제어
7. LED제어보드 구성 및 S/W 제어
8. 실증 테스트 결과
9. 결론
References

참고문헌 (7)

참고문헌 신청

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-091254991