지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.10
- 수록면
- 5 - 15 (11page)
- DOI
- 10.5293/kfma.2024.27.5.005
이용수
초록· 키워드
오류제보하기
Understanding the unsteady flow structure of axial pumps is crucial for pump design to reduce losses and increase efficiency. This paper analyzes both the steady and unsteady flow structures in the diffuser at design and partial flow rates. The unsteady flow field in the axial pump is examined using URANS numerical analysis, and changes according to the flow rate are described based on the flow field at 70 % span. The results shows that the impeller wake, which exhibits dominant unsteady flow characteristics, mixes with the main flow during transportation, becomes deformed due to the flow structure in the diffuser, and plays a role in reducing mixing losses. This is attributed to the increase in passage blockage area at the diffuser blade pressure surface as the flow rate decreases. Therefore, a diffuser design that maximizes the effect of reducing mixing losses even at partial load points is required.
목차
ABSTRACT
1. 서론
2. 수치해석 방법
3. 연구 결과
4. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Hydraulic Loss and Internal Flow of a Pump Equipped with an Impeller with Radial and Annular Flow Channels
International Journal of Fluid Machinery and Systems
2023 .03
-
비정상수치해석을 통한 IGV 각도변경이 축류펌프 내 비정상유동장에 미치는 영향분석
한국유체기계학회 학술대회 논문집
2024 .07
-
Steady and Unsteady Flow Characteristics of a Multi-stage Centrifugal Pump under Design and Off-design Conditions
International Journal of Fluid Machinery and Systems
2019 .03
-
Leakage Flow Influence on SHF pump model performances
International Journal of Fluid Machinery and Systems
2015 .09
-
Leakage Flow Influence on SHF pump model performances
International Journal of Fluid Machinery and Systems
2015 .12
-
축류펌프 입구 절대 유동각이 저유량 영역의 성능곡선 기울기와 불안정 유동 현상에 미치는 영향
한국유체기계학회 학술대회 논문집
2023 .12
-
Analysis of the Impact of Impeller Wake Loss by Flow rate Change of Axial Flow Pump with IGV
한국유체기계학회 학술대회 논문집
2023 .12
-
The Effect of Different Inflows on the Unsteady Hydrodynamic Characteristics of a Mixed Flow Pump
International Journal of Fluid Machinery and Systems
2017 .06
-
Design of Mixed-flow pump for Ns475 Based on Optimum Design Database
International Journal of Fluid Machinery and Systems
2018 .06
-
1,200 mm 급 축류펌프 임펠러 형상변화가 성능에 미치는 영향
대한기계학회 춘추학술대회
2016 .12
-
Investigation into the Internal Flow Characteristics of a Pump-turbine Model
한국유체기계학회 논문집
2015 .08
-
Optimization of the diffuser vane in an axial-flow pump for improving energy performance
한국유체기계학회 학술대회 논문집
2024 .07
-
Flow Resistance Characteristics of Pulsating Turbulent Flow Through a 90° Bend
International Journal of Fluid Machinery and Systems
2023 .09
-
Unsteady Flow Condition of Centrifugal Pump for Low Viscous Fluid Food
International Journal of Fluid Machinery and Systems
2017 .12
-
Performance Evaluation of an Axial Flow Pump in Turbine Mode
한국신·재생에너지학회 학술대회 초록집
2023 .06
-
유동-구조 연성해석 기법을 이용한 플라스틱 축류홴의 블레이드 진동특성 평가
한국유체기계학회 논문집
2019 .10
-
Flow Features of a Prefabricated Pumping Station Operating under High Flow Rate Conditions
International Journal of Fluid Machinery and Systems
2018 .06
-
Flow Structure in Casing of Closed-Type Centrifugal Pump with Single Blade
International Journal of Fluid Machinery and Systems
2020 .03
-
Long-Distance Microscope Lens를 이용한 직교유동 가시화
대한기계학회 춘추학술대회
2016 .12
-
Hydraulic Characteristics of a Single-channel Pump Designed by the Affinity Law
한국유체기계학회 논문집
2023 .10
이 논문과 함께 이용한 논문
다단계 최적화 프로세스를 활용한 축류 펌프 임펠러 설계
이형진
,
최병열
,
최동훈
외 3명
한국유체기계학회 논문집
2022
.12
고양정 및 저유량을 만족하는 폐수처리용 펌프 설계 최적화
김성
,
김진혁
한국수소및신에너지학회논문집
2022
.10
축류펌프 임펠러 설계기술
김성
,
마상범
,
김진혁
외 1명
한국유체기계학회 학술대회 논문집
2020
.11
수직형 펌프 자동진단을 위한 규칙기반 진단 기술 개발
강민석
,
정덕영
,
박동희
외 3명
한국소음진동공학회논문집
2024
.12
Effect of Shaft Sleeve Design on the Hydraulic and Suction Performances of Two-stage Centrifugal Pump
Ujjwal Sh
,
estha
,
DaeHoon Kim
외 1명
한국유체기계학회 논문집
2024
.08
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-25-02-091072515