지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.2
- 수록면
- 41 - 53 (13page)
- DOI
- 10.14773/cst.2024.23.1.41
이용수
초록· 키워드
오류제보하기
Titanium alloy is gaining attention in the medical industry due to its excellent biocompatibility and osteoconductivity. However, the natural oxide film on the titanium surface is insoluble, resulting in inadequate bone adhesion. Therefore, it is necessary to optimize the contact between biological tissues and implant surfaces, and alter the chemical composition and morphological characteristics of the implant surface. In this study, the anodization method was applied to titanium surface treatment to form a uniform and robust oxide film. Subsequently, a chemical process, pore-widening, was employed to change the morphological characteristics of the oxide film. The concentration of the pore-widening solution was varied at 2, 4, 6, and 8 wt% and the process time was set at 30 and 60 minutes. As the concentration of the pore-widening solution increased the pore diameter of the oxide film increased. Notably, at 6 wt% for 60 minutes, the oxide film exhibited a coexistence of pillars and pores. Based on this, it was determined that surface roughness increased with higher concentration and longer process time. Additionally, the presence of pillars and pores structures maximized hydrophilicity. This study provides insights into enhancing the surface properties of titanium for improved performance in medical implants.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
내식성 향상을 위한 기능성 타이타늄 표면 개질
Corrosion Science and Technology
2021 .10
-
Pore-widening 및 나노입자 함침에 따른 알루미늄 양극산화피막의 색상 변화
한국표면공학회 학술발표회 초록집
2020 .12
-
Pore-widening 시간에 따른 단계적 양극산화를 이용한 알루미늄 합금 표면 연구
한국표면공학회 학술발표회 초록집
2019 .05
-
Investigating the effects of pore types on the pore geometry, topology and electrical resistivity in fractured and vuggy samples using pore-scale models
Geosystem Engineering
2019 .01
-
Fabrication of Superhydrophobic Aluminum Alloy Surface with Hierarchical Pore Nanostructure for Anti-Corrosion
Corrosion Science and Technology
2019 .01
-
Pool Boiling Heat Transfer of R-123 on Pored Surfaces
대한설비공학회 학술발표대회논문집
2019 .06
-
구형 PMMA와 WO<sub>3</sub> 분말이 혼합된 Camphene 슬러리의 동결건조에 의한 W 다공체 제조
한국재료학회지
2015 .01
-
알루미늄 1050 합금의 양극산화 시간에 따른 산화피막 성장 거동 및 부식 손상 연구
Corrosion Science and Technology
2022 .08
-
Determination of pore types in coquinas carbonates and their effects on formation factors and porosity exponents
Geosystem Engineering
2021 .01
-
Review of Several Experimental Methods for Characterization of Micro- and Nano-Scale Pores in Cement-Based Material
International Journal of Concrete Structures and Materials
2020 .11
-
집합조직 변화와 양극산화 Nano pore 특성
한국소성가공학회 학술대회 논문집
2016 .04
-
금속 3D 프린팅 공정 중 생성된 기공 분석 및
대한기계학회 춘추학술대회
2017 .11
-
Comparative Study of Pore Characterizations of Anodized Al–0.5 wt.% Cu Thin Films in Oxalic and Phosphoric Acids
NANO
2019 .01
-
스퍼터링을 통하여 다공성 양극산화 알루미늄 기판에 증착되는 니켈 박막의 기공 크기 조절
한국수소및신에너지학회논문집
2018 .10
-
Analysis of Intracellular Bone Ingrowth Characteristics on Trabecular-like Porous Structure according to Alteration of Pore size
대한기계학회 춘추학술대회
2021 .04
-
Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis
International Journal of Concrete Structures and Materials
2020 .07
-
Analysis of Compression and Permeability Behavior of Porous Ti6Al4V by Computed Microtomography
Metals and Materials International
2019 .01
-
알루미늄 합금 양극산화피막의 표면경도 측정법
한국표면공학회지
2020 .02
-
Improvement of Absorption Properties by Formation of Surface Pores Using Chemical Blowing Agent
한국고분자학회 학술대회 연구논문 초록집
2020 .10
-
진공박막증착법을 이용한 나노포어 가공 특성 연구
한국생산제조학회 학술발표대회 논문집
2019 .05
최근 본 자료
댓글(0)
0