메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
채호병 (부산대학교) 배상무 (부산대학교) 오진환 (부산대학교) 남유진 (부산대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제36권 제6호
발행연도
2024.6
수록면
281 - 288 (8page)
DOI
10.6110/KJACR.2024.36.6.281

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper provides foundational research into enhancing a building-integrated photovoltaic/thermal (BIPVT) system, focusing on predicting performance by examining the configuration of heat exchangers and flow rates in an air-based BIPVT system. Numerical analysis software (Ansys Fluent) was employed to calculate heat gain and PV efficiency under defined conditions: insulated sides of the BIPVT, a steady back panel temperature aligned with the building wall temperature (25℃), and maximal solar irradiance (1,000 W/m2) in steady-state scenarios. The findings indicate that PV cell temperature increases with greater internal fin spacing of heat exchangers and decreased flow rate. Conversely, the outlet temperature decreases with an increased flow rate. The efficiency of the PV system varied between 10.5% and 12.2%, with heat gain values ranging from 54.4 to 254.4 W/m². The pressure loss within the system ranged from approximately 3.9 to 27.8 Pa across a flow rate spectrum of 0.2 to 0.9 kg/s, demonstrating a linear increase with the flow rate. Additionally, variations in pressure loss based on fin spacing resulted in a reduction of approximately 67.3% in Case 2 and 48.0% in Case 3 compared to Case 1.

목차

Abstract
1. 서론
2. BIPVT 집열기 구성
3. 시뮬레이션 결과 및 분석
4. 결론
References

참고문헌 (0)

참고문헌 신청

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-24-02-089810153