지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.33 No.2
- 발행연도
- 2024.3
- 수록면
- 41 - 44 (4page)
이용수
초록· 키워드
오류제보하기
As nanoelectronic devices continue to shrink in response to demands for smaller and faster low-power, high-density devices, wasteful fabrication techniques are being replaced with methods that predetermine processing windows based on plasma parameter measurements. A cutoff probe comprising coaxial cables wrapped in Teflon is typically used for this measurement. However, because Teflon can be destroyed under high-density plasma conditions, a change in the dielectric material of the coaxial cable may be considered for process plasma or high-density plasma measurements. However, the nature of these changes has not been examined. Hence, this study analyzes the plasma measurement characteristics of a cutoff probe using electromagnetic wave simulations and a plasma equivalent circuit model focusing on the dielectric permittivity and thickness of the coaxial cable-based cutoff probe. According to the results, as the dielectric constant of the insulator of the coaxial cable increased from 1 to 20, the transmission intensity at the cutoff frequency decreased from –68 to –81 dB. Furthermore, with the increased thickness of the insulator, the transmission intensity at the cutoff frequency increased from –80 to –64 dB. The characteristic changes are explained using a circuit model that verifies that changes to the insulator’s dielectric constant and thickness affect the characteristic impedance of the cable, but not the plasma density measured by the cutoff probe. Nevertheless, the intensity of the observed transmission spectrum is affected. Hence, these findings are expected to contribute to the optimization of cutoff probes used for high-density plasma parameter measurements.
목차
ABSTRACT
1. Introduction
2. Simulation details
3. Results and discussion
References
참고문헌 (0)
참고문헌 신청이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-24-02-089575604