석회석미분말을 콘크리트용 재료로 활용하기 위하여 치환율을 달리하여 제조한 시멘트 경화체의 역학적 특성 및 내구특성을 평가하였다. 일반적으로 석회석미분말은 시멘트 수화반응에 기여하지 못함으로 이를 사용한 모르타르의 압축강도 시험결과 치환율이 증가할수록 압축강도는 감소하였다. 그러나 석회석미분말을 사용한 모르타르의 염소이온 침투저항성, 탄산화저항성 및 화학저항성 등 내구성능을 평가한 결과 석회석미분말의 작은 입자가 시멘트 경화체 내부의 미세한 공극을 채워주는 마이크로 필러효과로 인하여 치환하지 않은 기준 모르타르에 비하여 우수한 결과를 나타내었다. 따라서 석회석미분말은 콘크리트의 내구성 향상을 위한 효과적인 방법으로 활용될 수 있을 것으로 기대된다. 본 연구에서는 석회석미분말의 치환량을 0 %, 5 %, 10 %, 15 %로 변화시켜 내구성능을 평가하였으나 향후 석회석미분말의 종료와 치환량을 다양한 수준으로 변화시켜 내구성능에 미치는 영향을 보다 자세히 연구할 필요가 있을 것으로 판단된다.
In order to use limestone powder as a material for concrete, the mechanical and durability characteristics of cement matrices manufactured by varying the substitution rate were evaluated. In general, limestone powder did not contribute to the cement hydration reaction, so as a result of the compressive strength test of cement mortar using it, the compressive strength decreased as the substitution rate increased. However, as a result of evaluating the durability performance of cement mortar using limestone powder, such as chloride ion penetration resistance, carbonation resistance, and chemical attack resistance, small particles of limestone powder showed superior results compared to the unsubstituted control mortar due to the micro-filler effect of filling the fine pores inside the cement matrix. Therefore, limestone powder is expected to be used as an effective method for improving the durability of concrete. In this study, the durability was evaluated by changing the mixing amount of limestone powder to 0 %, 5 %, 10 %, and 15 %, but it is judged that it is necessary to study in more detail the effect on the durability by changing the end and mixing amount of limestone powder to various levels in the future.