지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.2
- 수록면
- 134 - 140 (7page)
이용수
이 논문의 연구 히스토리 (4)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
In this study, a simplified analysis method by directly applying inherent strain (DIS) at integration points to predict welding distortion of cylindrical shell structures was suggested. The 3D thermo-elastoplastic method demands substantial computational time. The strain as direct boundary (SDB) simplified method using virtual temperature encounters challenges in consecutive thermal structural analysis including welding distortion. The suggested method (that is, DIS) offers the advantage of enabling continuous thermal structural analysis after welding distortion analysis, with computational efficiency. To calculate inherent strain, lap laser welding with 2 mm and 2.6 mm SUS304 plates was performed, measuring fusion and heat-affected zone sizes via cross-sectional observations. Using the calculated inherent strain and our suggested direct input method, we conducted welding analysis and welding test on cylindrical shell structures. Comparison of welding distortion under same conditions revealed radial distortion difference within approximately 10%, corresponding with the experimental result and confirming a computational time reduction by over 2,000 times than those of thermo-elastoplastic analysis. Therefore, an efficient and accurate prediction of welding distortion was achievable through the suggested method.
목차
Abstract
1. 서론
2. 용접변형 간이 해석법
3. 평판 겹치기 용접 시험
4. 원통형 구조물의 용접변형
5. 결론
References
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-151-24-02-089402768