메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
하상수 (강남대학교)
저널정보
대한건축학회 대한건축학회논문집 大韓建築學會論文集 第39卷 第12號(通卷 第422號)
발행연도
2023.12
수록면
217 - 224 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study is to determine the crack width at the location where the mechanical splice device is installed on the reinforced concrete beam. The mechanical coupling device is Company B"s screw coupler. The screw was not completely fastened and artificially and unstablely joined so that the residual deformation amount was 1.0 mm. In order to experimentally investigate this, structural experiments were conducted on RC beams with and without mechanical joints. As a result of the experiment, it was found that a mechanical splice device with a residual deformation amount of 1 mm could be used if the stress level was low and half mechanical splice. However, even in the case of half a joint, it was found to exceed the allowable crack width at a location with a high stress level. In addition, even if the stress level is low, it is judged that careful attention is needed to use it in excess of the allowable crack width even in the case of full mechanical splice.

목차

Abstract
1. 서론
2. 실험체 계획
3. 실험체 설치
4. 실험결과
5. 결론
REFERENCES

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-24-02-089217330