메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
조홍재 (우원엠앤이) 최슬건 (우원엠앤이) 황동곤 (우원엠앤이)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제35권 제12호
발행연도
2023.12
수록면
633 - 645 (13page)
DOI
10.6110/KJACR.2023.35.12.633

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, theoretical reference building model for apartment house was established, and heating and cooling loads per unit were calculated in accordance with the current standard for energy conservation design in buildings and zero-energy building certification guidelines. Subsequently, an analysis was conducted, categorizing the results by region for 17 different cities, by floor area for 3 unit types, and by unit layout for 9 unit types. The analysis also considered heating and cooling load components based on both the current standard for energy conservation design in buildings and zero-energy building certification guidelines. The significant conclusions derived from this analysis can be summarized as follows. According to the current standard for energy conservation design in buildings, it is possible to achieve a reduction of 55.1% to 62.0% in cooling load compared to KS C 9306. For heating, a load reduction of 31.7% to 37.0% is achievable compared to the heat utilization facilities standard of the Korea District Heating Corporation. Application of zero-energy building certification guidelines, in comparison to the current standard for energy conservation design in buildings, results in a cooling load reduction of 8.6% to 12.3% and a heating load reduction of 14.0% to 15.2%. These findings indicate that the insulation performance of current standard for energy conservation design in buildings is approaching the level required for zero-energy buildings. In the future, in order to reduce the energy demand of apartment house in compliance with mandatory zero-energy building certification, it can be concluded that a reduction in heating and cooling load through the mitigation of factors other than insulation will be necessary.

목차

Abstract
1. 서론
2. 공동주택 표준모델 구축
3. 공동주택 단위 냉난방부하 산정
4. 결과 분석
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-24-02-088486242