메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Hyun-Joon Lee (Pusan National University) Liyu-Liu (Pusan National University) Won-Jong Jeong (Pusan National University) Seoung-Ki Lee (Pusan National University) Bong Ki Ryu (Pusan National University)
저널정보
대한금속·재료학회 Electronic Materials Letters Electronic Materials Letters Vol.19 No.1
발행연도
2023.1
수록면
55 - 65 (11page)
DOI
https://doi.org/10.1007/s13391-022-00379-z

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In compliance with the current trends, lithium secondary batteries are gaining attention as next-generation eco-friendlyenergy sources. However, the conventional liquid electrolytes are limited by their propensity to cause explosions and fi res. Several studies have been conducted on solid electrolytes owing to their stability and enlargement advantages. However,the mass production of solid electrolytes through the processing of crystallized glass is challenging because of the highcost, processing diffi culty, and extensive equipment requirements. The potential alternative strategy of using a molding andsintering manufacturing method is limited by performance degradation due to the presence of pores in the sintered body. To improve the performance of the Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 solid electrolyte sintered body, Bi 2 O 3 was applied as a sinteringaid, which improved its physical and electrochemical characteristics. The addition amount of the sintering aid was varied todetermine the optimal sintering conditions. A characteristic evaluation was conducted using the as-determined conditions,and reliability was ensured by evaluating long-term chemical durability.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0