지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.46 No.2
- 발행연도
- 2023.1
- 수록면
- 237 - 252 (16page)
이용수
초록· 키워드
오류제보하기
The article describes the development of a novel dissipative bracing connection device (identified by the acronym DRBrC) for concentrically braced frames in steel and composite structures. The origins of the device trace back to the seminal work of Kelly, Skinner and Heine (1972), and, more directly related, to the PIN-INERD device, overcoming some of its limitations and greatly improving the replaceability characteristics. The connection device is composed of a rigid housing, connected to both the brace and the beam-column connection (or just the column), in which the axial force transfer is achieved by four-point bending of a dissipative pin. The experimental validation stages, presented in detail, consisted of a preliminary testing campaign, resulting in successive improvements of the original device design, followed by a systematic parametric testing campaign. That final campaign was devised to study the influence of the constituent materials (S235 and Stainless Steel, for the pin, and S355 and High Strength Steel, for the housing), of the geometry (four-point bending intermediate spans) and of the loading history (constant amplitude or increasing cyclic alternate). The main conclusions point to the most promising DRBrC device configurations, also presenting some suggestions in terms of the replaceability requirements.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
거셋플레이트의 강성을 도입한 중심가새골조의 실용적인 해석 모델
한국강구조학회 학술대회 발표집
2021 .06
-
A study on detailing gusset plate and bracing members in concentrically braced frame structures
Advances in computational design
2018 .01
-
Experimental and numerical study of a proposed steel brace with a localized fuse
Structural Engineering and Mechanics, An Int＇l Journal
2022 .10
-
Seismic performance assessment of steel building frames equipped with a novel type of bending dissipative braces
Steel and Composite Structures, An International Journal
2019 .01
-
Seismic design and assessment of steel-concrete frame structures with welded dissipative fuses
Steel and Composite Structures, An International Journal
2020 .01
-
Structural behavior of inverted V-braced frames reinforced with non-welded buckling restrained braces
Steel and Composite Structures, An International Journal
2015 .01
-
Effect of connection modeling on the seismic response of steel braced non-moment resisting frames
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Progressive collapse analysis of buildings with concentric and eccentric braced frames
Structural engineering and mechanics : An international journal
2017 .01
-
Nonlinear behavior of connections in RCS frames with bracing and steel plate shear wall
Steel and Composite Structures, An International Journal
2016 .01
-
Seismic performance analysis of steel-brace RC frame using topology optimization
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Performance of innovative composite buckling-restrained fuse for concentrically braced frames under cyclic loading
Steel and Composite Structures, An International Journal
2020 .01
-
Conceptual configuration and seismic performance of high-rise steel braced frame
Steel and Composite Structures, An International Journal
2017 .01
-
초탄성 형상기억합금을 이용한 원상 복원 X형 철골 가새 골조
한국공간구조학회지
2018 .01
-
Evaluation of seismic criteria of built-up special concentrically braced frames
Steel and Composite Structures, An International Journal
2018 .01
-
Cyclic testing of innovative two-level control system: Knee brace & vertical link in series in chevron braced steel frames
Structural engineering and mechanics : An international journal
2017 .01
-
The cyclic behavior of steel polyoxymethylene composite braces
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
A ductile steel damper-brace for low-damage framed structures
Steel and Composite Structures, An International Journal
2022 .08
-
Diagonal bracing of steel frames with multi-cable arrangements
Structural engineering and mechanics : An international journal
2016 .01
-
Theoretical formulation for calculating elastic lateral stiffness in a simple steel frame equipped with elliptic brace
Steel and Composite Structures, An International Journal
2022 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0