지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.5
- 수록면
- 1,541 - 1,558 (18page)
- DOI
- 10.1016/j.net.2023.01.018
이용수
초록· 키워드
오류제보하기
The new Modified-690Gd alloy, namely as Nie30Cr-(10-x) Fe-xGd (x ¼ 0.5, 1.0, 1.5,2.0, 3.0 wt%) for function structure integrated thermal neutron shielding has been prepared and characterized. The Modified-690Gd alloy was mainly composed of g austenite matrix and (Ni, Cr, Fe)5Gd precipitated along grain boundaries. The new Modified-690Gd alloy had great mechanical properties, which had the tensile strength exceeding 620 MPa and the elongation being above 50%. Meanwhile, this alloy had excellent weldability and good corrosion resistance in boric acid. The new Modified-690Gd alloy is expected to be a kind of high efficiency thermal neutron shielding materials
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Monte Carlo simulation and optimization of neutron ray shielding performance of related materials
Nuclear Engineering and Technology
2024 .09
-
Current Situation on the Development of Gd-Duplex Stainless Steels for Neutron Absorbing and Shielding Materials
한국표면공학회 학술발표회 초록집
2016 .05
-
Effect of Mn Modification on Microstructure and Mechanical Properties of Magnesium Alloy with Low Gd Content
Metals and Materials International
2021 .01
-
Development and application analysis of high-energy neutron radiation shielding materials from tungsten boron polyethylene
Nuclear Engineering and Technology
2024 .06
-
Effect of Heat Treatment on Radiation Shielding Properties of Concretes
방사선방어학회지
2018 .01
-
Application of a Dynamic-Nanoindentation Method to Analyze the Local Structure of an Fe-18 at.% Gd Cast Alloy
Nuclear Engineering and Technology
2017 .01
-
Micro gadolinium oxide dispersed flexible composites developed for the shielding of thermal neutron/gamma rays
Nuclear Engineering and Technology
2023 .05
-
Fe-Gd-B 합금의 내식성과 표면 물성 평가
한국표면공학회 학술발표회 초록집
2017 .05
-
가돌리늄 첨가에 따른 2205 듀플렉스 스테인레스 강의 기계적 및 부식 특성 변화
한국주조공학회지 (주조)
2015 .01
-
Shielding design and analyses of the cold neutron guide hall for the KIPT neutron source facility
Nuclear Engineering and Technology
2018 .01
-
A356 및 A357 합금으로 용탕단조한 상용차 휠 허브의 미세 조직 및 석출상 변화에 따른 기계적 물성 비교
한국기계기술학회지
2020 .01
-
Titanium alloys: A closer-look at mechanical, gamma-ray, neutron, and transmission properties of different grade alloys through MCNPcode application
Nuclear Engineering and Technology
2024 .09
-
A Proposal on Evaluation Method of Neutron Absorption Performance to Substitute Conventional Neutron Attenuation Test
방사선방어학회지
2016 .01
-
개량 Al-6.5Si 합금의 미세조직, 인장 및 충격 인성에 미치는 합금 원소 첨가의 영향
소성·가공
2020 .06
-
Neutron irradiation impact on structural and electrical properties of polycrystalline Al2O3
Nuclear Engineering and Technology
2024 .02
-
Zr0.9Ti0.1Cr0.6Fe1.4 합금을 이용한 재활기기용 구동시스템 개발에 관한 연구
한국재활복지공학회 학술대회 논문집
2019 .11
-
MDCNTs가 함유된 ABS 컴파운드의 차폐 특성
한국생산제조학회 학술발표대회 논문집
2017 .12
-
Investigation of acrylic/boric acid composite gel for neutron attenuation
Nuclear Engineering and Technology
2020 .11
-
Optimization of shielding to reduce cosmic radiation damage to packaged semiconductors during air transport using Monte Carlo simulation
Nuclear Engineering and Technology
2020 .08
-
Occupational radiation exposure control analyses of 14?MeV neutron generator facility: A neutronic assessment for the biological and local shield design
Nuclear Engineering and Technology
2020 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0