지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.2
- 수록면
- 433 - 443 (11page)
- DOI
- 10.1016/j.net.2022.09.031
이용수
초록· 키워드
오류제보하기
Characterizing the behavior of nuclear reactor plate fuels is vital to the progression of advanced fuel systems. The states of pre- and post-irradiation plates need to be determined effectively and efficiently prior to and following irradiation. Due to the hostile post-irradiation environment, characterization must be completed remotely. Laser-based characterization techniques enable the ability to make robust measurements inside a hot-cell environment. The Laser Shock (LS) technique generates high energy shockwaves that propagate through the plate and mechanically characterizes cladding-cladding interfaces.
During an irradiation campaign, two Idaho National Laboratory (INL) fabricated MP-1 plates had a fuel breach in the cladding-cladding interface and trace amounts of fission products were released. The objective of this report is to characterize the cladding-cladding interface strengths in three plates fabricated using different fabrication processes. The goal is to assess the risk in irradiating future developmental and production fuel plates. Prior LS testing has shown weaker and more variability in bond strengths within INL MP-1 reference plates than in commercially produced vendor plates. Three fuel plates fabricated with different fabrication processes will be used to bound the bond strength threshold for plate irradiation insertion and assess the confidence of this threshold value.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
고밀도 U3Si2 핵연료판의 곡면 가공에 대한 연구
대한기계학회 춘추학술대회
2024 .11
-
Channel Gap Measurements of Irradiated Plate Fuel and Comparison with Post-Irradiation Plate Thickness
Nuclear Engineering and Technology
2023 .06
-
Establishment of the design stress intensity value for the plate-type fuel assembly using a tensile test
Nuclear Engineering and Technology
2021 .03
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
Thermal-fluid-structure coupling analysis on plate-type fuel assembly under irradiation. Part-II Mechanical deformation and thermal-hydraulic characteristics
Nuclear Engineering and Technology
2021 .05
-
Laser cladding 표면의 젖음성 평가
한국트라이볼로지학회 학술대회
2019 .04
-
Thermo-mechanical coupling behavior analysis for a U ? 10Mo/Al monolithic fuel assembly
Nuclear Engineering and Technology
2021 .09
-
Preliminary study on the thermal-mechanical performance of the U3Si2 /Al dispersion fuel plate under normal conditions
Nuclear Engineering and Technology
2021 .11
-
Monitoring of Fuel and Cladding Elongation in a Nuclear Fuel Rod
Journal of the Korean Society for Precision Engineering
2017 .07
-
레이저 클래딩 표면에 대한 젖음 특성에 관한 연구
한국기계가공학회지
2019 .11
-
금속 와이어를 이용한 레이저 클래딩 시스템 개발
한국정밀공학회 학술발표대회 논문집
2018 .05
-
Vibration of a Circular plate on Pasternak foundation with variable modulus due to moving mass
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Thermal creep effects of aluminum alloy cladding on the irradiation-induced mechanical behavior in U – 10Mo/Al monolithic fuel plates
Nuclear Engineering and Technology
2020 .01
-
DED 적층 방식을 활용한 원통면 경사 적층에 관한 연구
한국기계가공학회지
2022 .05
-
다각(多角)으로 Swaging된 판형연료집합체의 인장시험 평가
대한기계학회 춘추학술대회
2016 .05
-
Preliminary Study of Metal Cladding Process for Improving Impact Resistance
한국정밀공학회 학술발표대회 논문집
2017 .05
-
플레이트의 소성변형 과정이 재건술에서 플레이트 안정성에 미치는 영향
한국CDE학회 논문집
2016 .09
-
Assessment of three European fuel performance codes against the SUPERFACT-1 fast reactor irradiation experiment
Nuclear Engineering and Technology
2021 .10
-
Aluminum and E-glass epoxy plates behavior subjected to shock loading
Advances in materials research : AMR
2017 .01
-
SMR 주기기 제작을 위한 다이오드 레이저 클래딩 특성 분석(I)
대한용접학회 특별강연 및 학술발표대회 개요집
2022 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0