지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.10
- 수록면
- 9 - 17 (9page)
이용수
초록· 키워드
오류제보하기
In heterojunction (HJT) solar cells, an amorphous silicon passivation layer is attached to the top and bottom of a crystalline silicon layer. HJT solar cells are manufactured at approximately 200°C because the structure of amorphous Si:H changes at high temperatures. Therefore, the silver paste utilized as an electrode on HJT solar cells should be subsequently cured at low temperatures below 200°C. In addition, the electrode requires good conductivity even at low curing temperatures. An initiator in the binder is crucial for the production of silver paste capable of low-temperature curing. This study investigated the effects of various initiators on the characteristics of a binder and silver paste that can be cured at low temperatures. Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) were operated to investigate the initiation and thermal decomposition properties of binders. The relationship between gel contents and the electrical conductivity of cured pastes was explored to reveal the impact of the curing ratio on electrical conductivity. The appropriate utilization of the initiator resulted in a high curing rate, which in turn increased the electrical conductivity.
목차
Abstract
1. 서론
2. 실험
3. 결과 및 토의
4. 결론
REFERENCES
참고문헌 (13)
참고문헌 신청
Dobrotkova, Z., Sirana, K., and Audinet, P., The Price of Solar Energy: Comparing Competitive Auctions for Utility-scale Solar PV in Delveloping Countries, Energy Policy, Vol. 118, pp. 133-148, 2018, https://doi.org/10.1016/j.enpol.2018.03.036.
Vargas-Salgado, C., Aparisi-Cerda, I., Alfonso-Solar, D., and Gomez-Navarro, T., Can Photovoltaic Systems Be Profitable in Urban Areas? Analysis of Regulation Scenarios for Four Cases in Valencia City (Spain), Solar Energy, Vol. 233, pp. 461-477, 2022, ht
Fırat, M., Sivaramakrishnan Radhakrishnan, H., Singh, S., Duerinckx, F., Payo, M. R., Tous, L., and Poortmans, J., Industrial Metallization of Fired Passivating Contacts for n-type Tunnel Oxide Passivated Contact (n-TOPCon) Solar Cells, Solar Energy Mater
Li, X., Xu, Q., Yan, L., Ren, C., Shi, B., Wang, P., Mazumdar, S., Hou, G., Zhao, Y., and Zhang, X., Silicon Heterojunction-based Tandem Solar Cells: Past, Status, and Future Prospects, Nanophotonics, Vol. 10, No. 8, pp. 2001-2022, 2021, https://doi.org/1
De Wolf, S., Descoeudres, A., Holman, Z. C., and Ballif, C., High-efficiency Silicon Heterojunction Solar Cells: A Review, Green, Vol. 2, pp. 7-24, 2012, https://doi.org/10.1515/green-2011-0018.
Vargas-Salgado, C., Aparisi-Cerda, I., Alfonso-Solar, D., and Gomez-Navarro, T., Can Photovoltaic Systems Be Profitable in Urban Areas? Analysis of Regulation Scenarios for Four Cases in Valencia City (Spain), Solar Energy, Vol. 233, pp. 461-477, 2022, ht
Fırat, M., Sivaramakrishnan Radhakrishnan, H., Singh, S., Duerinckx, F., Payo, M. R., Tous, L., and Poortmans, J., Industrial Metallization of Fired Passivating Contacts for n-type Tunnel Oxide Passivated Contact (n-TOPCon) Solar Cells, Solar Energy Mater
Li, X., Xu, Q., Yan, L., Ren, C., Shi, B., Wang, P., Mazumdar, S., Hou, G., Zhao, Y., and Zhang, X., Silicon Heterojunction-based Tandem Solar Cells: Past, Status, and Future Prospects, Nanophotonics, Vol. 10, No. 8, pp. 2001-2022, 2021, https://doi.org/1
De Wolf, S., Descoeudres, A., Holman, Z. C., and Ballif, C., High-efficiency Silicon Heterojunction Solar Cells: A Review, Green, Vol. 2, pp. 7-24, 2012, https://doi.org/10.1515/green-2011-0018.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A Study on the Effect of Various Initiators of Acrylic Binder for Low-temperature Curing Silver Paste
한국고분자학회 학술대회 연구논문 초록집
2023 .10
-
고효율 태양전지 모듈을 위한 저온 공정 실버 페이스트에 관한 연구
한국태양에너지학회 학술대회논문집
2023 .11
-
무용제 타입 UV경화형 실버 페이스트 개발
마이크로전자 및 패키징학회지
2022 .06
-
Performance of CO₂‑Cured Alkali‑Activated Slag Pastes During Curing and Exposure
International Journal of Concrete Structures and Materials
2023 .03
-
Fabrication of low-temperature sintered silver paste for flexible electronics
한국생산제조학회 학술발표대회 논문집
2022 .05
-
우레탄 필름에 인쇄된 신축 가능한 전극 패턴의 특성
동력시스템공학회지
2018 .02
-
Proposing and Investigation of the Performance of the New Geopolymer Composites Mixture with Curing and Non-curing Condition
한국콘크리트학회 학술대회 논문집
2021 .05
-
Analysis of Adhesion and Resistance Characteristics with Various Curing Conditions of Fine Line Width Ag Electrodes for Crystalline Silicon-Based Heterojunction Solar Cells
한국신·재생에너지학회 학술대회 초록집
2021 .07
-
Effect of the Curing Condition and High-Temperature Exposure on Ground-Granulated Blast-Furnace Slag Cement Concrete
International Journal of Concrete Structures and Materials
2021 .05
-
Curing Kinetics of TDI/PTMEG-based Urethane Prepolymers Depending on the Amount of Curing Agent and Curing Temperatures by DSC and Real Time FT-IR Spectroscopy
Elastomers and composites
2017 .01
-
방열 특성 향상을 위한 Cu paste 경화 조건에 관한 연구
한국조명·전기설비학회 학술대회논문집
2022 .05
-
열풍기를 이용한 콘크리트 급열 보양 시 양생가옥 내 온도 분포 개선 방안
대한건축학회 학술발표대회 논문집
2022 .04
-
실버 나노분말을 이용한 메탈메쉬용 페이스트의 충전 및 와이핑 특성
한국분말야금학회지
2017 .01
-
Metal Acetylacetonate as both a Radical Initiator and a Catalyst for Polyurethane in Dual-Curing Reaction at low temperature
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
A Study on the Multi-Busbar Interconnection Process for Heterojunction Technology Solar Cells Using Electrically Conductive Adhesives
AFORE
2021 .10
-
플립칩 본딩용 비전도성 접착제의 속경화거동 평가기법
대한용접·접합학회지
2015 .10
-
혼화재료 및 양생방법이 초기 CO₂ 양생 시멘트계 제품의 강도에 미치는 영향
대한건축학회 논문집 - 구조계
2015 .08
-
FTIR을 이용한 광반응 아크릴레이트 혼합물의 열경화 거동 연구
폴리머
2019 .01
-
다양한 ECA 소재를 활용한 shingled 구조의 태양전지 효율 비교 분석
한국태양에너지학회 논문집
2019 .08
-
실리콘 이종접합 태양전지의 버스바 전극 두께와 접합강도의 상관관계
Current Photovoltaic Research
2023 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0