지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
With the recent popularity of mobile devices, the demand for lithium-ion batteries is increasing. In this study, the surface treatment process for the development of the Al (aluminum) lead tab for positive electrode, a key component of the pouch-type lithium-ion battery, was investigated. Anodizing and sealing processes were tested as surface treatment techniques. It was found that only a sealing process is needed to obtain sufficient adhesive strength. In the present study, an adhesive strength of 17 N/12 mm was achieved by degreasing and etching pretreatment, followed by a sealing process of 10 min duration. This adhesive strength was greater than that achievable using Cr (chromium) surface treatment. Using various surface analysis techniques, the shape and composition of the surface before and after being subjected to the surface treatment were compared and analyzed. The results of this study are expected to contribute to the development of an eco-friendly lead tab.
목차
ABSTRACT
INTRODUCTION
EXPERIMENTAL
RESULTS AND DISCUSSION
CONCLUSION
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Liquid extraction surface analysis-capillary electrophoresis/dual C⁴D of small ions on a lithium battery anode surface
한국분석과학회 학술대회
2021 .05
-
Nonlinear etching process of hydrogen-terminated Si(110)-(1×1) surfaces
한국진공학회 학술발표회초록집
2016 .08
-
Crystal orientation and morphology of Ag nanoclusters grown on the hydrogen-terminated Si(111)-(1×1) surface
한국진공학회 학술발표회초록집
2016 .08
-
Evaluation of barrier films against lithium diffusion for thin film lithium-ion batteries
한국진공학회 학술발표회초록집
2016 .08
-
Failure analysis of a failed lithium-ion battery by external impact/internal short
한국분석과학회 학술대회
2016 .05
-
Cycle-life prediction model of LiFePO₄-based lithium-ion battery module
한국진공학회 학술발표회초록집
2021 .02
-
Chemical stability of lithium lanthanum titanate as a protective lithium-ion conduction layer for lithium secondary batteries
한국진공학회 학술발표회초록집
2016 .08
-
Electrical resistance across atomic steps on topological insulator Pb-dopedBi2Te3 surface
한국진공학회 학술발표회초록집
2016 .08
-
Surface Characterization and Modification of Li-Ion Battery MaterialsGoodwin Avenue, Urbana, IL 61801, USA
한국진공학회 학술발표회초록집
2018 .08
-
Thermal loss analysis and cycle life modeling of Li-ion battery module
한국진공학회 학술발표회초록집
2020 .08
-
이온 및 입자분석을 통한 전자선 기반 NOx 처리공정 중 첨가제 재이용성 평가 연구
한국대기환경학회 학술대회논문집
2021 .10
-
Electrodeposited lithium layer as a anode for lithium metal batteries
한국진공학회 학술발표회초록집
2018 .02
-
Lithium phosphorus oxynitride thin film as a lithium anode protective layer for lithium metal batteries
한국진공학회 학술발표회초록집
2020 .02
-
Raman microscopy applied to the analysis of carbon-based anode materials for lithium ion battery
한국분석과학회 학술대회
2016 .05
-
The study of different Si-C ratio by controlling the amount of PVDF as anode material for lithium ion batteries
한국진공학회 학술발표회초록집
2016 .08
-
Control of Optical Properties by the Stepwise Chemical and Plasma Spray Treatment of Polycarbonate
Applied Science and Convergence Technology
2018 .11
-
Lithium rechargeable batteries with high energy density and high safety
한국진공학회 학술발표회초록집
2018 .08
-
Nanostructured Iron Oxide as an Advanced Anode Material in High-Performance Lithium-Ion Batteries
한국분석과학회 학술대회
2015 .05
-
리튬전지 안전을 위한 화학물질 분석 및 관리방안
한국분석과학회 학술대회
2024 .11
-
Study on the determination of boron in cathode active material of lithium ion battery by ICP-MS
한국분석과학회 학술대회
2017 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0