메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
최호림 (현대자동차) 김성민 (현대자동차) 유태일 (현대자동차) 강진욱 (현대자동차) 빈승현 (현대자동차)
저널정보
한국자동차공학회 한국자동차공학회 춘계학술대회 2023 한국자동차공학회 춘계학술대회
발행연도
2023.5
수록면
47 - 54 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The 2-Stage motor system is a technology that can enhance the performance of electric vehicles by increasing the power through the use of an open-end winding motor and a dual inverter system. It helps increase the available voltage size of the motor based on the same battery voltage standard. 2-Stage refers to two driving modes, and it allows the use of closed-end winding (CEW) mode and open-end winding (OEW) mode in one motor system using a switching switch. However, when the mode is switched, the available voltage ellipse size changes rapidly by about 1.7 times. This causes a significant change in the d-axis and q-axis current commands in the control area of the Interior permanent-magnet synchronous motor (IPMSM). As a result, torque ripple can occur in the vehicle during mode switching, which can significantly degrade vehicle speed and driving quality, and act as a factor of instability in mode switching. In this paper, variable modulation index control logic is proposed to prevent torque shock during switching. The logic was developed to prevent the rapid change in current command caused by the inverter’s available voltage difference in the CEW↔OEW switching boundary area. In this study, we proposed linear logic that can linearize the changes in the reference value of the voltage utilization ratio that determines the size of the voltage limit ellipse. It was confirmed that the available voltage change in the switching area can be linearized, and the current change, torque shock, and ripple were greatly improved. It is expected that the use of this control algorithm will alleviate the switching shock of the 2-Stage motor system, thereby improving the driving quality of the EV powertrain.

목차

Abstract
1. 서론
2. CONVENTIONAL CONTROL METHOD
3. PROPOSED VARIABLE MI CONTROL
4. EXPERIMENTAL RESULTS
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0