메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
한성호 (유원메디텍) 최복록 (강릉원주대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.40 No.8
발행연도
2023.8
수록면
593 - 598 (6page)
DOI
10.7736/JKSPE.023.027

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
When laparoscopic surgery is performed, polymer clip blood vessel ligators are widely used to prevent bleeding and secure surgical vision. However, long-term use of such ligators can cause many structural problems, especially in the jaw part where the clip is mounted directly to the blood vessel. For example, jaws of the ligation device might be opened above the design value and upper and lower jaws might be twisted against each other. In addition, buckling or bending deformation can easily occur at the tip of the inner shaft. Due to these problems, the ligation machine cannot ligate the clip properly, which might lead to a medical accident. Therefore, in this study, the design was changed to improve these problems by increasing the pin diameter and contact surface, applying a double pin structure, and changing the structure of the shaft tip. As a result, the modified model showed 12.5% and 10.2% improvements in opening and twisting stiffness compared to the initial model with 7.2% and 58% improvements in critical buckling load and bending stiffness, respectively.

목차

1. 서론
2. 혈관 결찰기 조(Jaw) 부분의 구조해석
3. 결론
REFERENCES

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0102-2023-555-001939659