메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Xiangyun Zhang (Lanzhou University of Technology) Ding Guoqiang (Lanzhou University of Technology) Dong Jiao (Lanzhou University of Technology) ZiZhou Yuan (Lanzhou University of Technology)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.28 No.2
발행연도
2023.6
수록면
181 - 186 (6page)
DOI
10.4283/JMAG.2023.28.2.181

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The solidification process of an alloy has a significant influence on its microstructure and properties. In this article, the effect of cooling rate on the microstructure and magnetic properties of the FeCoNi(CuAl)<SUB>0.8</SUB> high entropy alloys (HEAs) was investigated. Results showed that all the samples prepared at different cooling rates exhibited a duplex-phase structure of face-centered cubic (FCC) plus body-centered cubic (BCC). But the volume fraction of BCC and stacking density of the alloy increased with the increasing of cooling rate, leading to an increase in saturated magnetization. Furthermore, microstructure investigation showed that with the increasing of cooling rate, the grain size of the samples decreased, lattice distortion and residual stress increased, and more nanoprecipitates were embedded in the interdendritic phases of the sample, which may be responsible for the increase in coercivity of the alloy.

목차

1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0102-2023-428-001783013