메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Anthony Andrews (Kwame Nkrumah University of Science and Technology) Simon K. Y. Gawu (Kwame Nkrumah University of Science and Technology) Peter A. Olubambi (Tshwane University of Technology)
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제16권 제1호
발행연도
2015.2
수록면
37 - 40 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Lithomargic clay underlying Awaso bauxite deposits is non-plastic and therefore cannot be used to produce ceramic bodies. The plasticity of lithomargic clay has been enhanced by addition of 20 wt% of clay binder, moulded, dried and fired at 1350 and 1400 o C, respectively. The dwell time was varied from 30 to 120 minutes. Properties such as bulk density, apparent porosity, linear firing shrinkage, and compressive strength were investigated. Crystalline phases after firing were determined using X-ray diffraction technique. The results show the properties measured depends on both the temperature and dwell time. The optimum compressive strength for such bricks could be achieved either by firing at 1350 o C for 120 minutes or at 1400 o C for 30 minutes.

목차

등록된 정보가 없습니다.

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0