메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
허호성 (목포해양대학교) 김성종 (목포해양대학교)
저널정보
한국부식방식학회 Corrosion Science and Technology CORROSION SCIENCE AND TECHNOLOGY 제20권 제6호
발행연도
2021.12
수록면
466 - 474 (9page)
DOI
10.14773/cst.2021.20.6.466

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
A wet type scrubber for merchant vessel uses super austenitic stainless steels with pitting resistance equivalentnumber (PREN) of 40 or higher for operation in a harsh corrosive environment. However, it is expensivedue to a high nickel content. Thus, electrochemical behavior and cavitation erosion characteristics ofUNS S32750 as an alternative material were investigated. Microstructure analysis revealed fractions of ferriticand austenitic phases of 48% and 52%, respectively, confirming the existence of ferritic matrix andaustenitic island. Potentiodynamic polarization test revealed damage at the interface of the two phasesbecause of galvanic corrosion due to different chemical compositions of ferritic and austenitic phases. After a cavitation test, a compressive residual stress was formed on the material surface due to impact pressureof cavity. Surface hardness was improved by water cavitation peening effect. Hardness value was thehighest at 30 μm amplitude. Scanning electron microscopy revealed wave patterns due to plastic deformationcaused by impact pressure of the cavity. The depth of surface damage increased with amplitude. Cavitation test revealed larger damage caused by erosion in the ferritic phase due to brittle fracture derivedfrom different strain rate sensitivity index of FCC and BCC structures.

목차

등록된 정보가 없습니다.

참고문헌 (23)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0