메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Liqun Guan (Central South University) Yunlai Deng (Central South University) Yaofeng Luo (Central South University) An Luo (Central South University) Xiaobin Guo (Central South University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.27 No.10
발행연도
2021.10
수록면
3,740 - 3,749 (10page)
DOI
10.1007/s12540-020-00749-y

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In this study, low-cost Si was added to an Mg?8Gd?4Y?1Nd?0.5Zr alloy to regulate the intermetallic phases. The mechanicalproperties of 0, 0.5, and 1.0 wt% Si-added alloys were studied to explore the trade-off between the elastic modulus andstrength. The microstructures were characterized through metallographic microscopy, scanning electron microscopy applyingenergy dispersive spectroscopy, and transmission electron microscopy. The microstructures demonstrated that Y5Si3and GdSi phases formed and consumed the solid soluble Gd and Y elements, thus reducing the amount of precipitation andincreasing the size of the β′ phase. Correlations between the elastic modulus and the intermetallic phase indicated that theY5Si3and GdSi phases formed by the addition of Si were the mainly responsible for the improvement in the elastic modulus. The change in strength through the addition of Si was calculated, and the results revealed that such an addition could increasethe elastic modulus but with a reduction in the alloy strength. The addition of 0.5 wt% Si alloy resulted in a relatively highcomprehensive performance, with an elastic modulus of 46 GPa, a tensile strength of 278 MPa, a yield strength of 226 MPa,and an elongation of 4.9% under a cast-T6 state.

목차

등록된 정보가 없습니다.

참고문헌 (39)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0