지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.9
- 수록면
- 3,695 - 3,708 (14page)
- DOI
- 10.1007/s12540-020-00868-6
이용수
초록· 키워드
오류제보하기
An attempt was made to synthesis ex-situ formed Al/SiC MMC and in-situ formed Al/TiB2 MMC using stir casting methodwith different weight percentage of the ceramic particulates such as 4 wt%, 6 wt% and 8 wt% respectively. Significantimprovements of mechanical properties were observed when the addition of reinforcement particulates increased from 2 to8 wt%. The tensile strength and Rockwell hardness of the ex-situ and in-situ formed composites were conducted as per theASTM standard E08-16 and ASTM standard E18-15 respectively. The in-situ formed TiB2MMC has superior mechanicalproperties such as 0.2% proof strength, tensile strength and hardness as compared to ex-situ SiC MMC as well as base metal.
It is also concluded that the mechanical properties were increased with increase in wt% of reinforcement particles additions.
The Optical Microscopy and Scanning Electron Microscopy were used to examine the size and uniformity of reinforcementparticles whereas the Energy Dispersive X-ray analysis, X-ray diffractometer and Element Mapping analysis were used toconfirm the presence of TiB2particles.
목차
등록된 정보가 없습니다.
참고문헌 (23)
참고문헌 신청
C. N. Devi / 2013 / Micro structural aspects of aluminium silicon carbide metal matrix composite / Int. J. Appl. Sci. Eng. Res 1(2):250~254
S. Kayal / 2012 / Mechanical properties of the as-cast silicon carbide particulate reinforced Aluminium alloy Metal Matrix Composites / Int. J. Curr. Eng. Sci. Res 2(3):318~322
S. Kant / 2017 / Stir casting process in particulate aluminium metal matrix composite : a review / Int. J. Mech. Solids 9(1):973~1881
N. Parvin / 2008 / Preparation and mechanical properties of SiC-reinforced Al6061composite by mechanical alloying / Mater. Sci. Eng. A 492(1?2):134~140
G. J. Naveen / 2014 / Microstructure and mechanical properties comparison of Cast and Extruded Al6061-SiCp composites / IJRITCC 2(10):2982~2984
S. Kayal / 2012 / Mechanical properties of the as-cast silicon carbide particulate reinforced Aluminium alloy Metal Matrix Composites / Int. J. Curr. Eng. Sci. Res 2(3):318~322
S. Kant / 2017 / Stir casting process in particulate aluminium metal matrix composite : a review / Int. J. Mech. Solids 9(1):973~1881
N. Parvin / 2008 / Preparation and mechanical properties of SiC-reinforced Al6061composite by mechanical alloying / Mater. Sci. Eng. A 492(1?2):134~140
G. J. Naveen / 2014 / Microstructure and mechanical properties comparison of Cast and Extruded Al6061-SiCp composites / IJRITCC 2(10):2982~2984
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Synthetization and investigation on mechanical characteristics of aluminium alloy 7075 with TiB2 composite
Journal of Ceramic Processing Research
2021 .08
-
Microstructure and mechanical properties of B4C-TiB2 ceramic composites hot pressed with in-situ reaction
Journal of Ceramic Processing Research
2019 .01
-
Fe-TiB₂ 복합재의 표면 물성에 관한 연구
한국정밀공학회 학술발표대회 논문집
2015 .12
-
Mechanical Properties of Al-TiB₂-ZrB₂HybridMetalMatrixComposites
한국기계가공학회 춘추계학술대회 논문집
2017 .04
-
Fabrication of Sintered Compact of Fe-TiB2 Composites by Pressureless Sintering of (FeB+TiH2) Powder Mixture
한국분말야금학회지
2016 .01
-
Electrodeposition and characterization of Ni-W-TiB2 composite coatings
한국표면공학회 학술발표회 초록집
2019 .11
-
Effect of Isothermal Oxidation on Pure Titanium and (TiB+TiC)/Ti Matrix Composites
대한설비공학회 학술발표대회논문집
2015 .06
-
(TiB+TiC) 입자강화 Ti기 복합재료의 접촉하중에 따른 내마모 특성
한국주조공학회지 (주조)
2017 .01
-
Development of bamboo stem Ash-Al-Hybrid reinforced with Al2O3 produced by stir casting technique
Journal of Ceramic Processing Research
2021 .08
-
Assessment of Wear Characteristics of Fe-TiB₂ Sintered from Nanocomposite Mixtures
Journal of the Korean Society for Precision Engineering
2018 .10
-
Abrasive Wear Behaviour of TiB2 Reinforced In?Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites
Metals and Materials International
2021 .09
-
최신 금속복합재료의 연구 개발 동향 및 응용 현황
한국분말야금학회지
2020 .01
-
Investigation of mechanical properties and abrasive assisted electrochemical machining parameters on Al6061-10%TiB2-3%Gr hybrid ceramic composite
Journal of Ceramic Processing Research
2022 .06
-
MMC 서브모듈 간이 시험 장치 개발
대한전기학회 학술대회 논문집
2019 .07
-
Thermal Model and Numerical Simulation of Selective Laser Alloying Process of Elemental Ti and B
Metals and Materials International
2021 .01
-
Fe-TiB₂ 복합재의 트라이볼로지 특성에 관한 연구
한국트라이볼로지학회 학술대회
2016 .10
-
Investigation of the in-situ performance characterization method of the interface within 3D woven composites
대한기계학회 춘추학술대회
2024 .11
-
MMC-세라믹 적층배열 연구 및 모듈화를 통한 방호구조 설계
대한기계학회 논문집 A권
2018 .08
-
Creep Properties of Squeeze-Infiltrated Carbon Nanotube and Aluminum Borate Whisker Reinforced AS52 Mg Metal Matrix Composites
Metals and Materials International
2018 .01
-
동적 등가 회로를 이용한 MMC의 시뮬레이션 모델 개발
한국산학기술학회 논문지
2020 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0