지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.43 No.6
- 발행연도
- 2022.6
- 수록면
- 785 - 796 (12page)
이용수
초록· 키워드
오류제보하기
Concrete-encased steel (CES) beam, in which structural steel is encased in a reinforced concrete (RC) section, is widely applied in high-rise buildings as transfer beams due to its high load-carrying capacity, great stiffness, and good durability.
However, these CES beams are prone to shear failure because of the low shear span-to-depth ratio and the heavy load. Due to the high load-carrying capacity and the brittle failure process of the shear failure, the accurate strength prediction of CES beams significantly influences the assessment of structural safety. In current design codes, design formulas for predicting the shear strength of CES beams are based on the so-called “superposition method”. This method indicates that the shear strength of CES beams can be obtained by superposing the shear strengths of the RC part and the steel shape. Nevertheless, in some cases, this method yields errors on the unsafe side because the shear strengths of these two parts cannot be achieved simultaneously. This paper clarifies the conditions at which the superposition method does not hold true, and the shear strength of CES beams is investigated using a compatible truss-arch model. Considering the deformation compatibility between the steel shape and the RC part, the method to obtain the shear strength of CES beams is proposed. Finally, the proposed model is compared with other calculation methods from codes AISC 360 (USA, North America), Eurocode 4 (Europe), YB 9082 (China, Asia), JGJ 138 (China, Asia), and AS/NZS 2327 (Australia/New Zealand, Oceania) using the available test data consisting of 45 CES beams.
The results indicate that the proposed model can predict the shear strength of CES beams with sufficient accuracy and safety.
Without considering the deformation compatibility, the calculation methods from the codes AISC 360, Eurocode 4, YB 9082, JGJ 138, and AS/NZS 2327 lead to excessively conservative or unsafe predictions.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Influence of Shear Span-to-Effective Depth Ratio on Behavior of High‑Strength Reinforced Concrete Beams
International Journal of Concrete Structures and Materials
2021 .05
-
Fuzzy modelling approach for shear strength prediction of RC deep beams
Smart structures and systems
2015 .01
-
Experimental Verification of Resistance-Demand Approach for Shear of HSC Beams
International Journal of Concrete Structures and Materials
2016 .12
-
Tests of reinforced concrete deep beams
Computers and Concrete, An International Journal
2015 .03
-
Shear behavior and shear capacity prediction of precast concrete-encased steel beams
Steel and Composite Structures, An International Journal
2020 .01
-
Shear Strength of Prestressed Steel Fiber Concrete I-Beams
International Journal of Concrete Structures and Materials
2015 .09
-
Theoretical and experimental study on shear strength of precast steel reinforced concrete beam
Steel and Composite Structures, An International Journal
2019 .01
-
Pressure-Assisted Sinter-Bonding Characteristics at 250 °C in Air Using Bimodal Ag-Coated Cu Particles
Electronic Materials Letters
2020 .01
-
Design for shear strength of concrete beams longitudinally reinforced with GFRP bars
Structural engineering and mechanics : An international journal
2015 .01
-
Shear behavior of the hollow-core partially-encased composite beams
Steel and Composite Structures, An International Journal
2022 .09
-
Shear Resistance Prediction of Post-fire Reinforced Concrete Beams Using Artificial Neural Network
International Journal of Concrete Structures and Materials
2019 .09
-
Shear strength estimation of RC deep beams using the ANN and strut-and-tie approaches
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Predicting shear strength of SFRC slender beams without stirrups using an ANN model
Structural engineering and mechanics : An international journal
2017 .01
-
FEM Analysis of RC Deep Beam Depending on Shear-Span Ratio
ARCHITECTURAL RESEARCH
2017 .12
-
전단철근으로 보강되지 않은 강섬유보강 초고강도콘크리트의 전단강도에 대한 실험적 연구
대한건축학회 논문집 - 구조계
2017 .03
-
Shear Crack Control for High Strength Reinforced Concrete Beams Considering the Effect of Shear-Span to Depth Ratio of Member
International Journal of Concrete Structures and Materials
2016 .12
-
Experimental and Numerical Investigation of Shear Behavior of RC Beams Strengthened by Ultra-High Performance Concrete
International Journal of Concrete Structures and Materials
2019 .01
-
Shear behavior of steel reinforced concrete shallow floor beam: Experimental and theoretical study
Steel and Composite Structures, An International Journal
2022 .09
-
Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0