지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.42 No.4
- 발행연도
- 2022.2
- 수록면
- 427 - 446 (20page)
이용수
초록· 키워드
오류제보하기
Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (ds/bs) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener’s depth to width ratio also significantly influences the buckling characteristic.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis of stiffened Al/SiC FGM plates with cutout under uniaxial and localized in-plane edge loadings
Structural Engineering and Mechanics, An Int＇l Journal
2024 .03
-
Fatigue study on additional cutout between U shaped rib and floorbeam in orthotropic bridge deck
Steel and Composite Structures, An International Journal
2018 .01
-
Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO
Structural engineering and mechanics : An international journal
2016 .01
-
Influence of stiffener edge on the buckling load of holed composite plates
Steel and Composite Structures, An International Journal
2018 .01
-
Optimum design for thermal buckling of composite plates with semi triangular cutout using PSO algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2021 .10
-
Position optimization of circular/elliptical cutout within an orthotropic rectangular plate for maximum buckling load
Steel and Composite Structures, An International Journal
2018 .01
-
Vibration and buckling analyses of laminated panels with and without cutouts under compressive and tensile edge loads
Steel and Composite Structures, An International Journal
2016 .01
-
Buckling behavior of composite cylindrical shells with cutout considering geometric imperfection
Steel and Composite Structures, An International Journal
2019 .01
-
Effect of stacking sequence on thermal stresses in laminated plates with a quasi-square cutout using the complex variable method
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Fatigue evaluation and CFRP strengthening of diaphragm cutouts in orthotropic steel decks
Steel and Composite Structures, An International Journal
2021 .01
-
Buckling of axially compressed composite cylinders with geometric imperfections
Steel and Composite Structures, An International Journal
2018 .01
-
The effects of stiffener configuration on stiffened T-stubs
Steel and Composite Structures, An International Journal
2022 .08
-
최대 최소 주응력 관계를 활용한 Cutout Panel 구조물의 피로해석연구
항공우주시스템공학회지
2015 .12
-
Optimized stiffener detailing for shear links in eccentrically braced frames
Steel and Composite Structures, An International Journal
2021 .01
-
Structural analysis of FGM porous plate with cutouts using ABAQUS
항공우주시스템공학회 학술행사 논문집
2023 .05
-
Effect of stiffened element and edge stiffener in strength and behaviour of cold formed steel built-up beams
Advances in computational design
2016 .01
-
Strengthening of Cutouts in Existing One-Way Spanning R. C. Flat Slabs Using CFRP Sheets
International Journal of Concrete Structures and Materials
2017 .06
-
Web bend-buckling strength of plate girders with two longitudinal web stiffeners
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
고전압 COS 퓨즈의 충격성 소음 저감에 관한 연구
한국생산제조학회 학술발표대회 논문집
2016 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0