메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
황현규 (목포해양대학교) 김성종 (목포해양대학교)
저널정보
한국부식방식학회 Corrosion Science and Technology CORROSION SCIENCE AND TECHNOLOGY 제21권 제2호
발행연도
2022.4
수록면
158 - 169 (12page)
DOI
10.14773/cst.2022.21.2.158

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (18)

2022

Erratum : 다구찌 기법을 활용한 통계적·표면 분석에 따른 오스테나이트 스테인리스강의 전해연마조건 최적화 연구 다구찌 기법을 적용한 슈퍼오스테나이트계 스테인리스강의 표면 평탄화를 위한 전해연마 공정의 최적화 슈퍼오스테나이트 스테인리스강에 대하여 완전요인설계를 적용한 전해연마공정의 유효인자 산출에 관한 연구 다구찌 기법을 활용한 통계적·표면 분석에 따른 오스테나이트 스테인리스강의 전해연마조건 최적화 연구 UNS S31603에 대하여 완전요인설계를 이용한 전해연마조건에 따른 표면 거칠기의 유효인자 산출 오스테나이트 스테인리스강의 해수에서 전기화학적 특성에 미치는 전해연마시간의 영향 전해연마용액에서 동전위 분극실험 시 안정화시간 선정을 위한 전기화학적 특성 연구 오스테나이트 스테인리스강에 대한 다구찌 방법을 적용한 최적의 전해연마 공정 산출에 관한 연구 전해연마처리한 오스테나이트 스테인리스강의 해수에서 정전위와 동전위 분극 실험에 의한 전기화학적 특성 연구 UNS S31603에 대하여 완전요인설계 이용과 표면분석에 따른 전해연마 주요인자 선정에 관한 연구 전해연마 용액에서 안정화 시간과 표면 거칠기에 따른 오스테나이트 스테인리스강의 전기화학적 특성

초록· 키워드

오류제보하기
The objective of this study was to investigate the electrochemical behavior and damage degree of metalsurface under different conditions by performing a potentiodynamic polarization experiment using an electropolishing solution for UNS S31603 based on initial delay time and surface roughness (parameters). A second anodic peak occurred at initial delay time of 0s and 100s. However, it was not discovered at 1000s and 3600s. This research referred to an increase in current density due to hydrogen oxidation reaction among various hypotheses for the second anodic peak. After the experiment, both critical current density and corrosion current density decreased when the initial delay time (immersion time) was longer. As a result of surface analysis, charact eristics of the potentiodynamic polarization behavior were similar with roughness, although the degree of damage was clearly different. With an increase in surface roughness value, the degree of surface damage was precisely observed. As such, electrochemical properties were different according to the immersion time in the electropolishing solution. To select electropolishing conditions such as applied current density, voltage, and immersion time, 1000s for initial delay time on the potentiodynamic polarization behavior was the most appropriate in this experiment.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0