지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제23권 제6호
- 발행연도
- 2022.12
- 수록면
- 927 - 934 (8page)
이용수
초록· 키워드
오류제보하기
Ultrasonic assisted stir casting was used to fabricate aluminium based metal matrix composite reinforcement with 4% copperand various combinations (0, 1 or 2 wt.%) of aluminium oxide. In this study, Taguchi Grey Relational Analysis (GRA) wasused to optimise the wear behaviour of the metal matrix composite reinforcement. Reinforcing elements were visualised usingSEM, which shows that a uniform distribution is possible with just 1% aluminium oxide additions. In order to betterunderstand the association between wear factors such as sliding distance, sliding speed and applied load, we looked at the wearrate and friction coefficient. According to the Taguchi L9 orthogonal array, we conducted the trials. In each experiment, therate of wear as well as the coefficient of friction were measured. If you apply a force of 10 N, slide at 1 m/s for 1500 metres,the Taguchi GRA concluded that this was the best combination for your experiment. There is a 61 percent correlation betweenthe sliding velocity and composite wear. After all was said and done, the most well-worn surface was found to have the fewestscratches and fine grooves.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis of Tribological Properties of Tin Powder Filled Polypropylene Composites with Taguchi Method
폴리머
2022 .07
-
Effect of Rolling and Coiling Temperatures on Microstructure and Mechanical Properties of Medium-Carbon Pipeline Steel
Metals and Materials International
2020 .01
-
Microstructure and Wear Resistance of in situ Porous TiO/Cu Composites
Metals and Materials International
2016 .01
-
미끄럼 속도변화에 따른 철강재료의 미끄럼 마모거동(중마모 거동에 미치는 연마모 도입시험의 영향)
Tribology and Lubricants
2020 .06
-
Abrasive Wear Behaviour of TiB2 Reinforced In?Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites
Metals and Materials International
2021 .09
-
미끄럼 속도 변화에 따른 폴리우레탄 씰의 마모 특성
Tribology and Lubricants
2018 .04
-
High?Temperature Dry Sliding Wear Behavior of Al?12Si?CuNiMg Alloy and its Al2O3 Fiber?Reinforced Composite
Metals and Materials International
2021 .09
-
Influence of B4C on Dry Sliding Wear Behavior of B4C/Al?Mg?Si Composites Synthesized via Powder Metallurgy Route
Metals and Materials International
2021 .10
-
Multi objective optimization of wear characteristics on Al7075/Al2O3/B4C composites - Desirability approach
Journal of Ceramic Processing Research
2020 .01
-
거시적 슬라이딩 속도 기반의 마모 예측 방법
한국트라이볼로지학회 학술대회
2023 .10
-
실험계획법을 이용한 Al 합금의 마모 특성에 관한 연구
동력시스템공학회지
2021 .06
-
Effect of Semi-Solid Heat Treatment on the Microstructure and Dry Sliding Wear Behavior of Al–20Si Alloy at Optimized Parametric Conditions
Metals and Materials International
2021 .01
-
상대재에 따른 순철의 미끄럼 마멸속도 차이 분석
한국소성가공학회 학술대회 논문집
2016 .04
-
Frictional behaviour of epoxy reinforced copper wires composites
Advances in materials research : AMR
2015 .01
-
상대재와 분위기에 따른 순철의 미끄럼 마멸 기구 분석
소성·가공
2017 .12
-
Fatigue wear of polyamides with surface defects under different loading conditions
Advances in materials research : AMR
2016 .01
-
Microstructure and Wear Properties of Cu–La2O3 Composites Prepared by Spark Plasma Sintering
Metals and Materials International
2021 .01
-
The friction and wear characteristics of SiC ceramics heat treated at high temperature
Journal of Ceramic Processing Research
2017 .11
-
초고강도강판 프레스성형용 금형의 CrN 코팅층 마모수명 예측
소성·가공
2017 .06
-
Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites
Metals and Materials International
2021 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0