메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Raj Kishor Das, K. Ragupathy (Agni College of Technology) T. Senthil Kumar (S.A. Engineering College) S. Vishvanathperumal (S.A. Engineering College)
저널정보
한국고분자학회 폴리머 폴리머 제47권 제2호
발행연도
2023.3
수록면
221 - 232 (12page)
DOI
10.7317/pk.2023.47.2.221

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The nanocomposite of ethylene-propylene-diene monomer (EPDM), acrylonitrile-butadiene rubber (NBR), and halloysite nanotubes (HNTs) was produced. On a two-roll mill, the 0–25 parts per hundred rubber (phr) of HNTs with 70/30 EPDM/NBR was mixed. The effect of HNT on the cure characteristics (scorch (t<SUB>S2</SUB>) and optimum cure time (t<SUB>90</SUB>), cure rate index, maximum torque, minimum torque and torque difference) and mechanical properties of the composites were studied and discussed. Scanning electron microscopy (SEM) was used to examine the surface morphology of tensile-fractured EPDM/NBR rubber-HNTs. Tensile strength, 100% modulus, elongation at break, tear strength, hardness, abrasion resistance, and compression set were increased whereas rebound resilience, t<SUB>S2</SUB>, and t<SUB>90</SUB> were decreased with increasing in the concentration of HNTs in it.

목차

Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References

참고문헌 (63)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-578-000440698