메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
임동영 (Hyundai Technical High School) 지승욱 (Kangwon National University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제37권 제1호
발행연도
2023.2
수록면
45 - 52 (8page)
DOI
10.5207/JIEIE.2023.37.1.045

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study was to identify the characteristics of the tracking phenomenon in the PCB where DC flows, and to increase the resistance to the tracking phenomenon by using a guard. To this end, electronic boards (hereinafter, basic-test sample) printed with needle to needle electrodes at 4 ㎜ intervals was manufactured. In addition, a +guard test sample, a –guard test sample, and a double guards test sample were made by attaching a guard on the basic-test sample, and tracking experiments were performed 25 times for each sample, and the results were compared. The number of droplets required for tracking failure was 1.73 times more for the +guard test sample, 2.64 times more for the –guard test sample, and 5.39 times more for the double guard test sample than the basic-test sample. In particular, as a result of verifying the resistance to tracking at a significance level of 99%, it was found that the resistance to tracking was improved for all three types of samples. Based on the above results, we confirmed the possibility of using a guard to reduce the fire caused by the tracking phenomenon in the PCB.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험 결과
4. 결론
References

참고문헌 (17)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0