메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
최현 (LH) 황인태 (토지주택연구원) 이종성 (토지주택연구원)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2022년도 하계학술발표대회 논문집
발행연도
2022.6
수록면
251 - 255 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
As the insulation standards for walls and windows were raised, the maximum heating load was reduced. For this reason, this study was conducted because it was necessary to review the pitch of floor heating pipes. It takes 160 minutes to reach the initial indoor temperature of 15℃ to 20℃ when the pitch is 200mm, and 180 minutes when the pitch is 250mm. The temperature difference of about 0.5°C occurred during the same time, and it was found that it did not significantly affect the thermal environment. The temperature of the floor surface that residents feel uncomfortable was set to 27°C, and the minimum pitch of the heating pipe was analyzed to maintain above that temperature. When the hot water temperature was supplied at 50°C and the indoor temperature was maintained at 20°C, the minimum pitch was analyzed as the minimum pitch of 275 mm. In this study, it is proposed to design the heating pipe pitch 200-230㎜ at 250mm, and it is expected to reduce the cost by about 164,000 won per household and 5,130 won per pyeong based on 84㎡.

목차

Abstract
1. 서론
2. 연구방법
3. 바닥난방시스템 시뮬레이션 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0