메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
송인환 (한국전력공사) 정진성 (한국전력공사) 강연관 (한국전력공사) 김영대 (한국전력공사) 방명환 (한국전력공사) 양지효 (한국전력공사)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2022년 학술대회
발행연도
2022.11
수록면
72 - 75 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The recent fatigue failure on gas turbine blades caused by thermal fatigue is major issue when the gas turbines start-up and shut down frequently to keep balancing the grid as the power generation using renewable energy increases. The present study concentrates on evaluating the thermal fatigue life of blade simulating start-up and shut down of actual gas turbine operation. The experimental model of this study is actual 1<SUP>st</SUP> stage blades of industrial gas turbine, which are manufactured including internal cooling passages and film cooling and tip holes. The material of blades is IN738LC. A cooling air into turbine blade is provided from compressor during test to mimic the actual gas turbine operation. The thermocouples are installed at inlet and outlet of test section, and they are also attached on blade surface to measure temperature on blade surface. The heat load and total number of cycles for thermal fatigue test are calculated using lumped capacity method considering internal cooling passages of blade and Coffin-Manson equation about low cycle fatigue test result of the IN738LC. The heat load cycle and temperature measured from installed thermocouples show that present test facility for thermal fatigue of gas turbine blades are reliable.

목차

Abstract
1. 서론
2. 열 피로 시험
3. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0